|
Title: Galleto read looks like garbage?? Post by: EuroXs4 on November 27, 2016, 05:48:01 PM So long story short I bought a spare ecu to play with.I was able to get into bootmode and read the flash.However it seems as if the 518AK xdf I have none of the values line up.They dont make any sense.Especially for a bone stock ecu.Can anyone tell me what gives????Also when loaded into winols it says no checksums available???
Title: Re: Galleto read looks like garbage?? Post by: panos1975 on November 28, 2016, 09:20:40 AM file you posted is ok
Title: Re: Galleto read looks like garbage?? Post by: SB_GLI on November 28, 2016, 02:09:40 PM This is your version:
Reading Version Strings... -> Bootrom Version = 06.02 -> EPK = 39/1/ME7.5/5/A505U//24H/24H5AK6/290705/ -> Contents of ECUID data table: - '0261208230' (SSECUHN) - '1037378109' (SSECUSN) - '8E0909518AK ' (VAG part number) - '0006' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' -> No errors found. File is OK. ********************* This is the version that the community stage I uses: Reading Version Strings... -> Bootrom Version = 06.02 -> EPK = 40/1/ME7.5/5/4012.31//24E/Dst03o/110403// -> Contents of ECUID data table: - '0261208230' (SSECUHN) - '1037368072' (SSECUSN) - '8E0909518AK ' (VAG part number) - '0003' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' -> No errors found. File is OK. ********************* You can cross flash your ecu to 0003 Title: Re: Galleto read looks like garbage?? Post by: EuroXs4 on November 28, 2016, 05:34:00 PM Yeah I believe thats what Im gonna do.Its just easier.
|