|
Title: AEB head & manifold on AWM, tuning or corrections needed? Post by: Jerry Tunin on December 08, 2016, 02:00:30 PM Long story short, timing belt broke and could only get an AEB head/manifold. Is there anything I should do in the ECU tuning to compensate for the change in air flow or velocity?
Title: Re: AEB head & manifold on AWM, tuning or corrections needed? Post by: prj on December 08, 2016, 04:03:00 PM Boost PID and ignition timing.
That is all. Title: Re: AEB head & manifold on AWM, tuning or corrections needed? Post by: adam- on December 09, 2016, 05:03:39 AM Does the AWM have VVT?
Title: Re: AEB head & manifold on AWM, tuning or corrections needed? Post by: fknbrkn on December 09, 2016, 06:04:28 AM yes
and its working as i remember Title: Re: AEB head & manifold on AWM, tuning or corrections needed? Post by: prj on December 09, 2016, 01:55:47 PM In that case VVT will have to be coded out as well.
Title: Re: AEB head & manifold on AWM, tuning or corrections needed? Post by: Jerry Tunin on December 09, 2016, 02:07:58 PM In that case VVT will have to be coded out as well. VVT will not work with AEB? I transfered the cam sensor and gear window from the old AWM head... Title: Re: AEB head & manifold on AWM, tuning or corrections needed? Post by: fknbrkn on December 09, 2016, 02:53:37 PM its ok then
Title: Re: AEB head & manifold on AWM, tuning or corrections needed? Post by: Jerry Tunin on December 09, 2016, 07:31:15 PM Oh, and the hydraulic timing chain tensioner for completeness.
|