|
Title: med9 dtc off pls Post by: eazydaz on December 24, 2016, 02:07:20 AM please who can deleted one dtc on med9?thank you
16471/P0087/000135 Title: Re: med9 dtc off pls Post by: _nameless on December 24, 2016, 04:53:49 AM Just fix the problem my god
Title: Re: med9 dtc off pls Post by: eazydaz on December 24, 2016, 05:32:30 AM car run fine, without any problems, have new sensors etc..I think problem is in ecu, this dtc(with limp mode) come only sometimes
Title: Re: med9 dtc off pls Post by: gman86 on December 24, 2016, 04:45:15 PM It's not the ECU.
Title: Re: med9 dtc off pls Post by: IamwhoIam on December 25, 2016, 02:54:53 AM LOL
Title: Re: med9 dtc off pls Post by: eazydaz on December 25, 2016, 11:56:36 AM problem is in ecu(right side) mates...rail pressure was measured,logged many times,all is 100% good. Error shows only sometimes, without any problem with power etc, car run fine.
Title: Re: med9 dtc off pls Post by: gman86 on December 26, 2016, 06:06:31 PM problem is in ecu(right side) mates...rail pressure was measured,logged many times,all is 100% good. Error shows only sometimes, without any problem with power etc, car run fine. Measured manually? There's a fault somewhere. The sensor, the rail, the Hitatchi HPFP or electrics. It's not the ECU. Title: Re: med9 dtc off pls Post by: adam- on December 27, 2016, 05:42:06 AM I thought we were all about being helpful? Just code all the DTCs out. Who needs them anyway?
|