|
Title: No Logging possible on 47Z907551N (2.7TT-Manual-BES 250HP) Post by: pizzaschnitzer on January 02, 2017, 03:45:57 AM Hello Guys!
thanks in Advance for your great forum! on my 47Z907551N ecu the me7logger seems to be not working. at first, creating the ecu file it finds definitions and entries, after creating a log definition it finds all definitions either. the file is in the ecu-folder. editing the config file for logging the wanted parts, it starts the logging but timeouts in the car. the com error is ok, im not on the car right now. but with the VCDS Cable in FrankensteinMode it will try to recieve logging, but runs in timeout, same wit that simple kkl vag 409 cable. does anybody can tell me the reason? may i have to name the file "ecu.bin"? thankyou very much! i will try change some rights for the folder. Big Thanks! Title: Re: No Logging possible on 47Z907551N (2.7TT-Manual-BES 250HP) Post by: nyet on January 02, 2017, 06:33:23 PM Use VisualME7Logger.
Title: Re: No Logging possible on 47Z907551N (2.7TT-Manual-BES 250HP) Post by: ibanezgomez on June 15, 2017, 12:09:09 AM The apears to be that COM port is incorrect.
Check in Device Manager the port assigned to the attached cable. Title: Re: No Logging possible on 47Z907551N (2.7TT-Manual-BES 250HP) Post by: pizzaschnitzer on December 11, 2017, 03:10:39 PM i tried many times any com port does not work. the com is correct chosen.
does anybody has any kind of tip for me? does not work with the kcan kable, not with the vcds cable. any other i should try? Title: Re: No Logging possible on 47Z907551N (2.7TT-Manual-BES 250HP) Post by: prj on December 11, 2017, 04:31:07 PM The problem is wrong port or the port is being used by something else, as simple as that.
Title: Re: No Logging possible on 47Z907551N (2.7TT-Manual-BES 250HP) Post by: pizzaschnitzer on December 12, 2017, 04:12:54 AM so you KNOW that it is possible to log that ecu with no changes?
what cable would you choose? |