|
Title: Me7.5 O2 circuit Fried... trying to fix Post by: Jim_Coupe on January 08, 2017, 11:20:25 AM Hi,
I opened my ECU (me7.5) and discovered that pin51 was coocked inside ecu.. Pin 51 is Front O2 sensor... I have now repaired the broken copper lane but still have problems.. Any ideas on IC´s or other stuff that i shall check that could be broken in the circuit for o2 sensor. ? Title: Re: Me7.5 O2 circuit Fried... trying to fix Post by: adam- on January 08, 2017, 02:18:37 PM It's not worth repairing.
Title: Re: Me7.5 O2 circuit Fried... trying to fix Post by: Jim_Coupe on January 09, 2017, 07:01:49 AM Hehe true...I tried to refit some ic's but naaah.. These narrowband me7.5 ecus are cheap. Already have 2 new ecus on the way. But the question is whay coocked the ecus. Hmmm..
Title: Re: Me7.5 O2 circuit Fried... trying to fix Post by: jogtx16v on January 09, 2017, 08:29:27 AM common cause is shorted wiring in o2 sensor wiring.
Title: Re: Me7.5 O2 circuit Fried... trying to fix Post by: Zenerdiode on January 09, 2017, 01:44:55 PM But the question is whay coocked the ecus. Hmmm.. By far the biggest reason is the heater element in the O2 sensor fails short-circuit. This was a massive oversight on manufacturer; not to run the heater supply through a fuse. Title: Re: Me7.5 O2 circuit Fried... trying to fix Post by: Jim_Coupe on January 10, 2017, 04:31:41 AM Ok i just had that thought why didnt they fuse the damn wire.. I think ill solder a fuse on that wire just in case and throw in a new O2 sensor and check the wiring. Dont want to fry more ECUs.
Title: Re: Me7.5 O2 circuit Fried... trying to fix Post by: aef on March 12, 2021, 12:42:56 AM Was it like this one in your case?
|