NefMoto

Hi Guys

Please could someone have a look at the attached screenshot of my stock KFMIRL. I am trying to figure out if the xdf I am using is correct for my ecu. What I did last night is multiplied the whole KFMIRL table by 2 and then increased LDRXN and LDRXNZK accordingly to match. I took a test drive and logged lamda/mg/s and boost but my boost doesnt seem too have increased?

Whoooooaaaa! STOP!

that is NOT correct

you need to edit that xdf to work with your file.

thanks for the feedback, ok I would love too edit the xdf but I am batteling too figure out how too correlate the KFMIRL too a hex beginning and end?

attached are my original bin and the xdf I have, if someone could just give me a quick run down I am sure I will be able too be of some benefit too this forum.

what I am trying is too edit the xdf parameter for KFMIRL, then take the address in hex for example 0x1E27C and then trying too search for that in winols so that I can see if there is anything that stands out.... but when I search for that hex address in any hexeditor or even winols its not being found.

Start analyzing patterns on other defined files and you fill find KFMIRL. KFMIRL is one of the easier maps to find.

Oh, and please flash back to stock ASAP!

I have opened the TT ols files posted up here and the other defined maps are there but not KFMIRL?

nevermind, click search maps  ::)

sorry to be a pain but please could someone point out the pattern in the following... am I meant to be looking at the graphs on the right of the hex?

please could someone tell me if this is perhaps it?

this helped me figure out some basics of winols perhaps it can help someone else

http://free-tuning.com/html%20pages/tuning%20guide.html

I think this is the correct map for KFMIRL? The x and y axis isnt correct though, how do I fix that?

I don't usually spoon feed but I'll upload some screenshots of a proper kfmirl defined map. Is this a tt225?

If you can't properly find these maps then you are prob not fit to be modifying anything though.

thank you I appreciate your help....

What is this file off?

its off a audi 1.8T 2002 and I think I may have cracked it!!! the winols interface is a little clunky but here is my first map

does that look right?

OK so I have managed too find KFMIRL, KFLDHBN, LDRXN, LDRXNK in winols. I am having a slight issue with maps like KFZWOP I cant seem too figure out what too use as the x-axis?

OK I was trying too figure out how too copy what I have done into tunerpro but I am batteling a little soooo (feeling a little stupid) in winols I have figured out how too adjust a map for example kfmirl --- double click the map, in text mode select all, press % and increase by whatever BUT once done how do I export my bin so that I can flash my car and try it out? Anyone?

There is a little icon of a PAGE with an arrow leaving it to the right. This is above the Project window.
Hit that.

 :'( nope I have the winols demo looks like I cant export............... anyway if I can figure out how too copy the work I have done in winols into tunerpro that would be fine, my first attempt doesnt look right too me?

OK I compared too another S4 xdf/bin I found on here, this is mine now please could someone conffirm that it all looks OK? Could someone explain how I would go about switching the axis so the graph was facing the other way? Sorry for all the questions.

this is very helpful.