|
Title: ME7.5 KFLBTS Map Post by: gin+ on January 31, 2017, 12:25:45 PM Could someone tell me if this map is properly defined and if it is, explain to me how the left hand column is derived? I expected it to be load%. This is from the me7.5 A4 stage one project xdf.
Title: Re: ME7.5 KFLBTS Map Post by: NOTORIOUS VR on January 31, 2017, 01:10:07 PM That doesn't like like KFLBTS to me.
Title: Re: ME7.5 KFLBTS Map Post by: SB_GLI on January 31, 2017, 02:39:34 PM at least not a correctly defined one
Title: Re: ME7.5 KFLBTS Map Post by: gin+ on January 31, 2017, 02:40:55 PM Agreed. I'm certainly a newb but I'm trying to get a handle.
After adding the correct number of rows I think it might be the correct table location as the lamba values look like what I'd expect for BTS but the Y axis is not properly defined. Looks like I need SRL12GKUW? The xdf had SRL12GKUB defined; not sure what that is. Quote KFLBTS Shares the Y-axis (called "sampling points for mixture control SRL12GKUW") with: KFFDLBTS If anyone has the location or could point me to the right place I'd appreciate it although I don't know as if I necessarily need it. Title: Re: ME7.5 KFLBTS Map Post by: gin+ on February 03, 2017, 10:01:45 AM Figured this out.
Load Axis SRL12GKUB @ 0x26E9A This should probably be moved to the definition forum section. Title: Re: ME7.5 KFLBTS Map Post by: eliotroyano on February 06, 2017, 08:36:59 AM KFLBTS Shares the Y-axis (called "sampling points for mixture control SRL12GKUW") with: KFFDLBTS. Figured this out. Load Axis SRL12GKUB @ 0x26E9A This should probably be moved to the definition forum section. Just a dumb question how do you know from hexdump, which is and where is located the proper axis of that map? Title: Re: ME7.5 KFLBTS Map Post by: gin+ on February 07, 2017, 08:48:36 AM I used a definition file from a different software version and compared to the one I wanted to use. Basically, I followed this...https://www.youtube.com/watch?v=0dkuoFh2foQ&feature=youtu.be
Title: Re: ME7.5 KFLBTS Map Post by: eliotroyano on February 07, 2017, 06:37:51 PM I used a definition file from a different software version and compared to the one I wanted to use. Basically, I followed this...https://www.youtube.com/watch?v=0dkuoFh2foQ&feature=youtu.be GIN+ I really appreciate the help but my concern it is mainly axis of a any map, in other words how do you locate the right axis of any map in a ME7 hexdump? Title: Re: ME7.5 KFLBTS Map Post by: nyet on February 07, 2017, 11:29:45 PM GIN+ I really appreciate the help but my concern it is mainly axis of a any map, in other words how do you locate the right axis of any map in a ME7 hexdump? There is no fixed idiot proof simple way to do this. Look for patterns that match a known file, look for axis data right before the map, and finally disassemble the ASM. Title: Re: ME7.5 KFLBTS Map Post by: eliotroyano on February 08, 2017, 05:36:09 AM There is no fixed idiot proof simple way to do this. Look for patterns that match a known file, look for axis data right before the map, and finally disassemble the ASM. Ok understood, thanks for the comment. |