NefMoto

Noob Zone => Noob Questions => Topic started by: bobg on February 18, 2017, 03:55:04 PM



Title: me7 audi a4 1.8t tuning
Post by: bobg on February 18, 2017, 03:55:04 PM
Hey everyone,

Hoping I can get some help here. I am very new to this and I am trying to adjust ldrxn as per s4 wiki to raise boost, if I am understanding correctly I should be getting approx 18psi. My adjustments did make minor difference but no much. I have attached bin file for review.

Thx


Title: Re: me7 audi a4 1.8t tuning
Post by: nyet on February 18, 2017, 05:33:57 PM
Post logs.


Title: Re: me7 audi a4 1.8t tuning
Post by: bobg on February 19, 2017, 04:01:15 PM
Post logs.

thx nyet, I dont have a cable that I can currently log with. I am using mpps for flashing. I started from scratch following the wiki and all seems pretty good now I dont know what was holding the boost back but I just copied ldrxn from old file etc and now i'm getting around 18psi.

thx again,


Title: Re: me7 audi a4 1.8t tuning
Post by: dokalanyi on February 19, 2017, 11:09:40 PM
You should really not be tuning without the ability to log. Just flash the stock file back, and then order for a cable that can log and wait.


Title: Re: me7 audi a4 1.8t tuning
Post by: adam- on February 20, 2017, 02:33:24 AM
Have you got sorted fuel?