NefMoto

Thought i should play around with me7loggerGUI it was about time.

I have some problems connecting Me7logger. COM3 port is OK both in HW config and in program.

Me7logger makes some tries but cannot connect..  I have no problem connecting VCDS to the car

info:
ECU: 06A906032HJ  (Swaped from narrowband ecu in an A4 B5 ANB)

Any hints?

Did you read the 31 and 15 page ME7L threads yet?

DO NOT use the ME7LoggerGUI - it is buggy and unreliable

Use VisualME7Logger instead

http://nefariousmotorsports.com/forum/index.php?topic=4830.0title=
https://visualme7logger.codeplex.com/releases/view/614988

I tried Visual Me7logger.. The problem in VisualLogger was could not find my KKL cable at com port 2...  I changed COM port to COM3 in the cfg file.. 

I make a try with Visual logger again.. Maybe my COM port was take by the other software..

Both VisualME7Logger and MELoggerGUI use ME7Logger underneath.

I get this message.. Seems like the car wont respond.  VCDS and Nefmoto flasher works though.

Please include a screen shot of VME7L settings screen, as well main screen so we can see the .ecu and .cfg file that you are using, and the command line you use to run ME7Logger manually.

Thanks here is my config

Your screenshot of the main screen cuts off the bottom, so you can't see both the .ecu, and .cfg file....

You didn't include the command line you use to run ME7Logger in your last post.

Is the .ecu file that you have selected in VME7L the same exact config file you are using with ME7Logger via the command line?   Based on the full path to the .ecu file that I see here, my guess is no.

Take the VisualME7Logger.exe and put it in your ME7Logger directory and it might make life easier on you.

Hello, i have this error :( .....what does it mean ?

Check that you cable is correctly installed in Windows System > Hardware
And cehck that you hav set correct com port in settings.!

Already done... in hardware it's all correct and com3 setted well also on me7logger  :-\