|
Title: 8N0906018H 0004 XDF Post by: BoobieTrap on March 02, 2017, 07:34:56 AM This may help someone save countless hours of getting cross-eyed by looking at Hex patterns...
I've used an original .bin file posted on this forum a while back (attached) together with a fully defined Winols (also attached) for a similar ECU. I also used a partially defined XDF I found of these forums as a starting point. The maps in the .OLS are more or less identical to the binary but the offsets aren't constant. Crossflashed it onto an ECU I bought on ebay (06A 906 032 HJ) and used it to successfully convert my narrowband APX to wideband. I know most of the definitions are correct because I used this to copy the alot of the maps from my APX and disable rear O2, cat, VVT, SAI, EVAP, N249 (removed by previous owner). The fueling definitions are also correct because I used them to convert to ID1000 injectors. I can't guarantee that *every* definition is correct but most of them are. Good luck! |