|
Title: I am installing S60R Motor and Manual trans in auto XC70 Post by: Thebigk on March 02, 2017, 08:46:42 PM Hi guys,
I wanted to see what exactly I need to get this going. From my understanding if I just flash an S60R 2004 manual transmission Bin, I'll be fine, it's unconfirmed whether I will need a CEM flash as well. (hopefully not) Otherwise I am wondering if removing 4C will give me a headahce. Title: Re: I am installing S60R Motor and Manual trans in auto XC70 Post by: venderbroeck on March 03, 2017, 07:12:38 AM Depends on what year your xc is.
The internal rom of different my ecu's is different as well as is the can bus speed and the immo setup. Using a different generation bin than what came with your car is not very feasable afaik. You're better off modifying a manual bin from the same my to suit the engine. Title: Re: I am installing S60R Motor and Manual trans in auto XC70 Post by: Thebigk on March 03, 2017, 07:47:10 AM both are 2004, USA versions. I read Euro years are different for R's. I hope the same year would of made it easier to move
Title: Re: I am installing S60R Motor and Manual trans in auto XC70 Post by: venderbroeck on March 03, 2017, 08:37:22 AM Comparing the asm may yield more info. Or trying it out in a spare ecu or smth. Making it work if it doesn't may be quite a challenge, but I don't know enough of the details of the differences between those bins to be sure.
|