|
Title: please help po600 I'm stranded flashed .bin went for test drive shut car off Post by: ben2401 on March 18, 2017, 08:56:59 AM I shut the car off, parked, went to start back up and it would only crank. Nefmoto will not connect, ELM 327/ Torque Pro shows po600. Tiptronic PRNDL is lit up in the screen. Clearing code makes cluster and shift console lights flash 3x. How can I get the car running? Do I need a tow?
Title: Re: please help po600 I'm stranded flashed .bin went for test drive shut car off Post by: Mikhail on March 18, 2017, 10:22:34 AM Flash boot mode. This thread is galletto download
http://nefariousmotorsports.com/forum/index.php?topic=639.0title= You probably can use the same cable than nefmoto. Title: Re: please help po600 I'm stranded flashed .bin went for test drive shut car off Post by: adam- on March 18, 2017, 02:12:08 PM Checksum error and now you have a brick. Bootmode recovery.
Title: Re: please help po600 I'm stranded flashed .bin went for test drive shut car off Post by: ben2401 on March 18, 2017, 04:23:22 PM Thanks for the replies. Got a Mbox 4D0 906 018M ecu at the junkyard for $150 and it seems to work fine for now. Pretty sure CHbox and Mbox for 2001 A4 1.8t AWM are interchangeable. Would it matter if tip or not? Do I need to recode anything? Really lucky as I need the car tonight. After thinking it over I may have flashed my stock CHbox ecu with a euro file with immo - would that be the cause of the no start and solid PRNDL lights? Do I need a Galetto 1260 and corresponding software to access boot mode or does Nefmoto support it now? Would like to get the original ecu up and running as a backup/test mule. Thanks again.
Title: Re: please help po600 I'm stranded flashed .bin went for test drive shut car off Post by: adam- on March 20, 2017, 02:57:06 AM Stop flashing random files onto it and you'll be fine. :)
|