|
Title: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: UM-Olli-92 on March 22, 2017, 02:41:44 PM Hey Guys
Just a short simple question. Can I just copy the data from a RS4 mlhfm map and paste it into my 1.8t bin file? Will it work ? I mounted a bigger turbo into my wideband converted S3 (1999) Or do I have to manually scale my old stock mlhfm map ? Thanks in advance Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: TijnCU on March 22, 2017, 02:45:33 PM Did you install a complete rs4 maf? If so, yes.
Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: UM-Olli-92 on March 22, 2017, 03:08:13 PM Yes the complete MAF incl. housing (0 280 218 067) from RS4 b5
Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: nyet on March 22, 2017, 03:08:57 PM Don't forget MLOFS if applicable
Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: UM-Olli-92 on March 22, 2017, 03:14:45 PM Don't forget MLOFS if applicable Both (my stock and rs4 maf) are Bosch. So i guess MLOFS is 200 in both files ? In my 1.8t file it is already 200 Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: UM-Olli-92 on March 22, 2017, 03:16:28 PM Are Axisdata important in mlhfm ?
Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: nyet on March 22, 2017, 03:29:05 PM Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: TijnCU on March 22, 2017, 11:49:46 PM Isnt the 1.8t mlhfm axis virtual? don't know about rs4.
Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: UM-Olli-92 on March 23, 2017, 12:23:21 AM I'm asking, because my axis looks like this:
(already pasted RS4 values) Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: TijnCU on March 23, 2017, 03:03:04 AM That axis is incorrect. try 8 bit 1,2,3 data with factor 0.009765625
* data is also not right! My definition shows 16 bit lo/hi values with factor 0,1. should look something like this: Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: BoobieTrap on March 31, 2017, 01:30:21 AM Hey Guys Just a short simple question. Can I just copy the data from a RS4 mlhfm map and paste it into my 1.8t bin file? Will it work ? I mounted a bigger turbo into my wideband converted S3 (1999) Or do I have to manually scale my old stock mlhfm map ? Thanks in advance I'm actually about to do the same thing but on a wideband converted audi TT (2001), using RS4 MAF and GTX3071R. What turbo are you planning on running? Have you thought about the ps_w limit? My plan is to copy the MLHFM map and increase boost slowly while watching ps_w. Might need to underscale KFKHFM and compensate with KFLF. Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: TijnCU on March 31, 2017, 01:34:30 AM Or do 5120 hack and have tons of headroom! Even on stock map sensor this is really helpfull. But I can imagine GTX turbo wants to run at pressures over 1.5 bar too...
Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: BoobieTrap on March 31, 2017, 01:03:30 PM Or do 5120 hack and have tons of headroom! Even on stock map sensor this is really helpfull. But I can imagine GTX turbo wants to run at pressures over 1.5 bar too... I would love to do that but when I briefly looked into it, I saw that ASM changes are needed so I assumed it is near impossible for a noob like me. Maybe I will give it another look. Any idea if someone has already done it for 8N0906018H or similar? Title: Re: Copy MLHFM from RS4 bin to 1.8t bin ? Post by: pathanas on June 26, 2018, 06:58:20 AM I'm actually about to do the same thing but on a wideband converted audi TT (2001), using RS4 MAF and GTX3071R. What turbo are you planning on running? Have you thought about the ps_w limit? My plan is to copy the MLHFM map and increase boost slowly while watching ps_w. Might need to underscale KFKHFM and compensate with KFLF. What did you do on thant project finally? |