NefMoto

Hi all,

I am a beginner looking to tune my own vehicle (Fiat Bravo 1.4 T-jet ME7.9.10), I've been at it for about 2-3 months now, reading as absorbing as much as I can from this forum, although it may be a predominantly for Audi/VW owners, I've learnt a LOT from the gurus here. So thank you guys for that.

Moving on, given the limited information on this ECU, I've resorted to many places for help, even grabbing a 'pro' tuned file from someone here locally. (file was however rated as complete rubbish by a experienced tuner that is active here)

So here I am, asking for the help, to have a look at my file, and help me along by pointing out mistakes and improvements that should be made (plenty I'm sure) I've made on the file i've been messing with. I hope you don't see this as a 'rate my tune' kind of thread. I've got a ELM327 bluetooth adaptor but i'm not too sure how to log the parameters as you guys do.

I have attached the original file, edited file, and definitions that I pulled from the Alpha Romeo Mito damos (Highly inaccurate I know, so I've done my best and corrected as much as I can).

I'm not too sure how I can contribute back to the community, but if you guys need some resources/info from Asia (Singapore) I'd be most happy to help out.

Thank you again.

Program used: WinOLS
Checksum verified with: ECM Titanium
Flashed with: MPPS V16 (China)

Best regards,
Mat

Anyone can help to have a look? Really need someone to point me in the right direction..

Hi , i give a look to your mapack and you have all you need for a good tune ... A good starting point is to study the Fiat Punto Abarth esse esse version it comes from factory with 180ps and it is having overboost 1.7bar from factory (one of the highest oem values ) i use this file as guidance ...i attach you the ori from it.

Hi Friend,

your car will go like crazy

I think you should start with comparison 120 vs 150 version.