|
Title: MED9 MAF reading Post by: gman86 on April 19, 2017, 01:27:13 AM So the diagnostic channel reports a max of 364.08g/sec, but does the ECU "see" any more? I've used KFKHFM to dial down my fuel trims so the MAF reading is overscaled a touch. When logging in VCDS, 364.08 is the most I see so I wondered if the ECU is then having to go soley on wideband feedback for fuelling. Lambda control is +/- 5% in the higher revs so it doesn't seem to be struggling.
Title: Re: MED9 MAF reading Post by: nubcake on April 19, 2017, 03:30:27 AM So the diagnostic channel reports a max of 364.08g/sec, but does the ECU "see" any more? Yes. ~1820 is the hard limit. Title: Re: MED9 MAF reading Post by: gman86 on April 19, 2017, 03:58:50 AM Yes. ~1820 is the hard limit. 1820g/sec or kg/hr? Either way, I'm good. 1820kg/hr is 505g/sec. Title: Re: MED9 MAF reading Post by: nubcake on April 19, 2017, 07:55:35 AM g/sec.
or 6553.5 kg/hr. But you will probably max out your ps_w way before that. |