|
Title: ME 7.8 ecu mods, na to supercharging? Post by: DRD on April 21, 2017, 09:46:43 AM Looking for some input on ME 7.8 ecu map mods , super charging a na engine.
I have a Porsche 3.6L NA car. Looking to add a supercharger to it, got most of it figured out, but the ecu of course. Have done as much research as I could find, this site has given me the most info. I will need bigger injectors, need to raise the maf limit, and fueling when it comes on boost, 6 lbs max. From what I have been told, the ecu runs closed loop at all times, and the timming is controled by knock adapation, As I have monitored the timming as this this happen. larger Injectors can be scaled, found maps, and maf can be scaled, have found those maps also. Questions are, I have been told that the lamfa table will adjust some of the fuelling too a point, but some basic trim maps and fault thresholds will need changes also.. Anyone have and ideas on this? I can post up the bin file if needed. Thanks DRD Title: Re: ME 7.8 ecu mods, na to supercharging? Post by: _nameless on April 21, 2017, 09:49:14 AM by any chance do you have a original read
Title: Re: ME 7.8 ecu mods, na to supercharging? Post by: DRD on April 21, 2017, 10:00:27 AM Here is the stock bin file.
Thanks |