|
Title: DODGE HEMI THROTTLE BODY 80mm on 1.8T me7.5 ECU configuration Post by: Rocky on May 08, 2017, 09:15:19 PM Hi there
I know it's not proper to install such big throttle body for 1.8T. It's mounted with Integrated Engineering Manifold in 1.8T and i know there are projects with good configuration works no problem. Is there anyone who can prepare me dodge hemi throttle body 80mm(inner), 86mm(outer) calibration for 1.8t me7.5? Not for free of course. Is there something to change more than: KFMSNWDK KFWDKMSN PID? Best Regards Title: Re: DODGE HEMI THROTTLE BODY 80mm on 1.8T me7.5 ECU configuration Post by: _nameless on May 09, 2017, 05:19:46 AM Hi there To start your values are very wrongI know it's not proper to install such big throttle body for 1.8T. It's mounted with Integrated Engineering Manifold in 1.8T and i know there are projects with good configuration works no problem. Is there anyone who can prepare me dodge hemi throttle body 80mm(inner), 86mm(outer) calibration for 1.8t me7.5? Not for free of course. Is there something to change more than: KFMSNWDK KFWDKMSN PID? Best Regards Title: Re: DODGE HEMI THROTTLE BODY 80mm on 1.8T me7.5 ECU configuration Post by: yxx499 on May 09, 2017, 11:38:48 AM The values of KFMSNWDK can not exceed 100%, and same for KFWDKMSN.
Title: Re: DODGE HEMI THROTTLE BODY 80mm on 1.8T me7.5 ECU configuration Post by: nubcake on May 10, 2017, 12:53:35 PM The values of KFMSNWDK can not exceed 100% ??? Is there something to change more than: KFMSNWDK KFWDKMSN Those two are supposed to be inverse of each other, yours look off. You also might want to look at WDKUGDN. Logging msdk_w and mshfm_w along with RPM and wdkba & pressure vars might help to find proper values. |