|
Title: KFLDIMX and KFLDRL with k03s non stock (on an AYP or AGU) Post by: ivan on May 15, 2017, 04:31:19 AM Hi, studing the s4wiki and thinking arround lot of ideas, i get in a doubt.
If we change the turbo for a bigger one (one from other me7) for example a k03s or k04 on a car with k03 as stock, we will need to adjust KFLDIMX and KFLDRL. Will be a good idea start from the original file of the car or better copy maps from k03s or k04 file? I ask that because studing differences between an k03 (150 hp) and k03s (180hp) i have noticed there are a lot differents on KFLDIMX and KFLDRL. BR. Title: Re: KFLDIMX and KFLDRL with k03s non stock (on an AYP or AGU) Post by: nyet on May 15, 2017, 11:43:32 AM Will be a good idea start from the original file of the car or better copy maps from k03s or k04 file? Copying the maps may give you a good baseline, but you may still need to do further tweaking. Title: Re: KFLDIMX and KFLDRL with k03s non stock (on an AYP or AGU) Post by: ivan on May 15, 2017, 02:55:53 PM Copying the maps may give you a good baseline, but you may still need to do further tweaking. thanks nyet! yes, i have been reading about it, I see lots of differences bettwen k03 and k03s, and there are almost same turbo, maybe n75 and other valves changes?Title: Re: KFLDIMX and KFLDRL with k03s non stock (on an AYP or AGU) Post by: KasperH on May 15, 2017, 09:12:50 PM K03s (k03-053) is bigger in both the turbine and compressor, although not by much, therefore the larger IOP/IRL Enough for ~220 bhp and ~330nm on a decent flowing engine. It also has a stronger wastegate spring (85N iirc) N75 would still be the same :)
Title: Re: KFLDIMX and KFLDRL with k03s non stock (on an AYP or AGU) Post by: ivan on May 16, 2017, 01:30:35 AM OK, so copying kfldimx and kfldrl if I change the turbo por a k03s and exxtrapolate irl and iop would be enough.
I ask that becouse i though i will need further modification to avoid limp modes with the new turbo. Title: Re: KFLDIMX and KFLDRL with k03s non stock (on an AYP or AGU) Post by: KasperH on May 16, 2017, 03:25:24 AM OK, so copying kfldimx and kfldrl if I change the turbo por a k03s and exxtrapolate irl and iop would be enough. I ask that becouse i though i will need further modification to avoid limp modes with the new turbo. As nyet said, copying the specific turbo related maps will get you started :) Title: Re: KFLDIMX and KFLDRL with k03s non stock (on an AYP or AGU) Post by: ivan on May 16, 2017, 05:09:46 AM Great thanks!!
|