|
Title: MProg_3.5 invert RS232 signals option window help Post by: solingen on June 17, 2017, 03:54:31 PM After reading some things available I decided to flash the generic serial to one of my older cables. The thing is that the tutorial doesn't show that any of the dialog boxes are checked, while my cable does. Everything else in the process works just fine, no issues. Additionally my cable has some extra I/O Controls available than what is pictured also. My question is this: I don't think the extra I/O controls should matter, but I am worried about the Inversion of the RS232 signals being activated... Should I be worried? Should I try to re-flash without the dialog boxes checked? Will the extra I/O's matter? Maybe this cable isn't going to work correctly without some tweaks. The cable in ? is a OBD cable designed for use with older ver. of INPA\GT1 and has pins 7 and 8 jumped.
Thanks for the help! - Solingen in Florida Title: Re: MProg_3.5 invert RS232 signals option window help Post by: solingen on June 20, 2017, 11:49:59 AM Solved.
Title: Re: MProg_3.5 invert RS232 signals option window help Post by: SB_GLI on June 20, 2017, 01:06:19 PM Solved. So you come here, ask for help, solve the issue yourself, but don't follow up with details of how you solved your problem. That will help people with same problem in the future. That's how I do it too. Good work. |