|
Title: Audi s3 8L 8N0906018BH MAF delete (mafless) help Post by: ducatilm on June 19, 2017, 02:08:59 AM Hello,
anyone know the exact addresses for MAF remove (run Mafless) on 8N0906018BH (Audi S3 BAM) ecu or can share file ?? I have build an engine with big turbo etc, and I want to run mafless my car. Title: Re: Audi s3 8L 8N0906018BH MAF delete (mafless) help Post by: jimmcgee5 on June 19, 2017, 02:29:06 AM try searching ;D, here http://nefariousmotorsports.com/forum/index.php?topic=531.0 to start you off
Title: Re: Audi s3 8L 8N0906018BH MAF delete (mafless) help Post by: ducatilm on June 19, 2017, 02:59:20 AM try searching ;D, here http://nefariousmotorsports.com/forum/index.php?topic=531.0 to start you off Thank you for your reply, I have read that post many times but is not 100% correct. Also I have try this with no good result, limp mode again and again.mbox: 1b9e2 - KFMLDMN threshold for B_minflr diagnosis HFM/HLM change entire map to 0 10d69 - CWBGMSZS change from 2 to 0 1819c - CDEHFM maf code word change from 1 to 0 18802 - CWDHFM maf code word change from 0 to 1 and finally, the one map you can change alone to simply remove the illusive p0102 fault and sensor error limp but will not have cruise and esp without the other 4 changes... 10716 - CLALM maf voltage signal error class change from 3 to 1 With a 5120 setup and properly calibrated throttle maps, Title: Re: Audi s3 8L 8N0906018BH MAF delete (mafless) help Post by: _nameless on June 19, 2017, 07:39:37 AM I have working solution with asr hack all works how it should. Pm me if lyoud like
|