|
Title: Show Us Your Bench Flashing Setup! Post by: Zac on December 17, 2011, 06:40:53 PM I want to see everyone's bench flashing setup!
I'll go first - mine's a surefire "most ghetto setup" award winner! (yes version 1 used the battery out of my car haha) Title: Re: Show Us Your Bench Flashing Setup! Post by: Gonzo on December 17, 2011, 07:23:47 PM Nope. I have one that's ghetto-er. Not sure if I want to post pics though :P
Title: Re: Show Us Your Bench Flashing Setup! Post by: AmIdYfReAk on December 17, 2011, 09:03:37 PM Keepin it simple.
Title: Re: Show Us Your Bench Flashing Setup! Post by: Zac on December 17, 2011, 09:36:50 PM Keepin it simple. Nice! PC power supply? Gotta get me a harness from a junked car. Looks much quicker to hook up & disconnect. Title: Re: Show Us Your Bench Flashing Setup! Post by: Gonzo on December 17, 2011, 09:45:22 PM Yeah junk yard harness is the way to go.
Title: Re: Show Us Your Bench Flashing Setup! Post by: Zac on December 17, 2011, 10:11:14 PM Content from other threads:
Matt Danger - Version 1 - http://nefariousmotorsports.com/forum/index.php/topic,417.msg2805.html#msg2805 (http://nefariousmotorsports.com/forum/index.php/topic,417.msg2805.html#msg2805) - Version 2 - http://nefariousmotorsports.com/forum/index.php/topic,417.msg4023.html#msg4023 (http://nefariousmotorsports.com/forum/index.php/topic,417.msg4023.html#msg4023) judeisnotobscure - http://nefariousmotorsports.com/forum/index.php/topic,417.msg4295.html#msg4295 (http://nefariousmotorsports.com/forum/index.php/topic,417.msg4295.html#msg4295) pvl - http://nefariousmotorsports.com/forum/index.php/topic,417.msg9685.html#msg9685 (http://nefariousmotorsports.com/forum/index.php/topic,417.msg9685.html#msg9685) Title: Re: Show Us Your Bench Flashing Setup! Post by: terok on December 18, 2011, 04:25:19 AM Only the cable with adapters for different ecus. Also note the professional fuse and ignition switch :)
http://personal.inet.fi/koti/terokoo/kuvat/bench_flash.jpg (http://personal.inet.fi/koti/terokoo/kuvat/bench_flash.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: AmIdYfReAk on December 18, 2011, 10:17:44 PM Keepin it simple. Nice! PC power supply? Gotta get me a harness from a junked car. Looks much quicker to hook up & disconnect. yep, junkyard connector, spade connectors for the switched ignition and its as simple as that! pc supplies are good to give a solid 12.08v with no issues, and so far I haven't had a singe bad read/program with it. Title: Re: Show Us Your Bench Flashing Setup! Post by: Tony@NefMoto on December 22, 2011, 05:08:29 PM I have a junk yard ECU connector, wired to a female OBD plug. I power it with an 18 volt wall wart AC adapter that I run through a little adjustable voltage regulator set to 12.5 volts. I have a power switch before the voltage regulator, and an ignition switch after the regulator. Then everything is wrapped in heat shrink tubing.
Title: Re: Show Us Your Bench Flashing Setup! Post by: infinkc on December 22, 2011, 09:00:00 PM here is a picture of my workbench
Title: Re: Show Us Your Bench Flashing Setup! Post by: NOTORIOUS VR on March 13, 2012, 08:09:17 PM Just cleaned up my bench harness, and am now using a random 12V AC to DC adapter I had kicking around (12V @ 1.2A) It puts out around 15V DC w/ no load on it so it's perfect.
(https://lh6.googleusercontent.com/-QqMrzm75Z8M/T2ACaz9ySxI/AAAAAAAABI0/ajgJJsxPC2s/s800/IMG_20120313_222846.jpg) Testing the cable w/ the new supply and since I cleaned up the connections and wrapped it nicely: (https://lh5.googleusercontent.com/-Tz0QaPBZsOM/T2AIyMGs9PI/AAAAAAAABJs/G-phyx724B8/s800/IMG_20120313_225055.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: prj on October 23, 2012, 04:21:29 PM Wanted to share mine as well here.
The power supply is a universal supply, and I use it for all my bench setups. This one is for ME7. I have a different one for M2.3, EDC and so on. The power comes through the stereo socket via the plug. The 12V is of course inside and ground outside. I use VAG 2x2 adapter cables to have an easy K-Line to OBD II plug, and the Motronic connector from the junkyard for 2 euros :) The supply also is connected through a UPS, to prevent bricking. Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on October 23, 2012, 06:26:15 PM heres all my crap:
pc psu converted to bench with on/off switch: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo2-16.jpg) 12v/ground from psu, also has k line from molex > obd connector: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo3-8.jpg) me7: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo4-3.jpg) m3/5: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo12.jpg) b5 abs harness (making b6 abs harness next): (http://i795.photobucket.com/albums/yy231/k0mpresd/photo5-1.jpg) b5 cluster harness: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo32.jpg) med9 harness: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo22.jpg) chopped the obd2 plug from the med9 harness and molex'd it. made rj45 from breakbox > obd2: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo23.jpg) dsg > db9: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo1-21.jpg) db9 > breakbox. also shows generic harness > db9: (http://i795.photobucket.com/albums/yy231/k0mpresd/photo13.jpg) example of breakbox set up: (http://i795.photobucket.com/albums/yy231/k0mpresd/AF70F393-91ED-4DC9-95B0-F89E1211C958-15675-000007CAF5DCD088.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: Rabbid on November 03, 2012, 02:26:28 PM Along with Pete we made a new toy tonight! I was just going to get a bunch of cables and wire up the 2 plugs we got from a scrappy earlier but then on the way home I decided we needed to pop into maplin. This soon got out of control and the extra bit of wire I needed to buy soon turned into a bunch of wires LED's resistors, connectors, switches, oh and a nice shiney black box.
So we set to work and this is what we ended up with: (http://i788.photobucket.com/albums/yy162/Richard25000/306613_10151077536260957_1021903870_n.jpg) (http://i788.photobucket.com/albums/yy162/Richard25000/WP_000436.jpg) Click here to see it in action! (http://i788.photobucket.com/albums/yy162/Richard25000/th_WP_20121103_205323Z.jpg) (http://s788.photobucket.com/albums/yy162/Richard25000/?action=view¤t=WP_20121103_205323Z.mp4) Title: Re: Show Us Your Bench Flashing Setup! Post by: UrbanAssaultar on November 22, 2012, 11:29:45 AM I want to see everyone's bench flashing setup! I'll go first - mine's a surefire "most ghetto setup" award winner! (yes version 1 used the battery out of my car haha) Here's what I made last night. Works like a champ! (http://images.quattroworld.com/proxy.svc/Images/Image?id=a6c3138332fd4c219b0ddb44c06055f3.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: RaraK on November 30, 2012, 09:16:03 PM (http://www.dotuning.com/images/dtBench.jpg)
Title: Re: Show Us Your Bench Flashing Setup! Post by: matchew on December 01, 2012, 12:19:44 AM could you post a bigger picture please?
Title: Re: Show Us Your Bench Flashing Setup! Post by: ddillenger on December 01, 2012, 10:35:22 AM lol
Title: Re: Show Us Your Bench Flashing Setup! Post by: ddillenger on December 01, 2012, 10:38:59 AM Here you go.
Title: Re: Show Us Your Bench Flashing Setup! Post by: RaraK on December 02, 2012, 04:49:15 PM LOL sorry i kinda didnt look at the post after posting...
Title: Re: Show Us Your Bench Flashing Setup! Post by: ta79pr on December 04, 2012, 08:37:30 PM Also looking to make an 80 pin one too, but not sure of the pinout (99 1.8t ME7.5)
Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on December 09, 2012, 02:51:15 PM updated my set up:
(http://i795.photobucket.com/albums/yy231/k0mpresd/ACFDA31C-2742-415B-BC81-F6280FE69D04-9713-000004A544732202.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: ddillenger on December 09, 2012, 04:34:42 PM k0mpressed-
Did you have any issues getting that cable to connect? I've never been able to read a flash with it, it just hangs. I have two of them and it's always bugged me. Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on December 09, 2012, 05:24:31 PM i dont use that for flashing. mpps for k line ecus, bdm for med9, and x17 for the new stuff. thats what i use.
Title: Re: Show Us Your Bench Flashing Setup! Post by: aef on December 10, 2012, 02:43:42 AM Cables for Me7 and Me3.8
(http://dl.dropbox.com/u/17128887/Foto%2008.12.12%2021%2010%2032.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on December 10, 2012, 11:15:44 AM so just in case anyone is ever curious, the breakbox does not have enough juice to power an abs module and trips in to overload. :P
Title: Re: Show Us Your Bench Flashing Setup! Post by: prj on December 10, 2012, 12:24:16 PM so just in case anyone is ever curious, the breakbox does not have enough juice to power an abs module and trips in to overload. :P What laptop is that? Looks a lot like a macbook, but I know it's not. Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on December 10, 2012, 12:38:40 PM What laptop is that? Looks a lot like a macbook, but I know it's not. ideapad p500. best $600usd ive ever spent. Title: Re: Show Us Your Bench Flashing Setup! Post by: phila_dot on December 10, 2012, 12:47:49 PM What is that little controller box looking thing in Rarak and k0mpresds' pictures?
Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on December 10, 2012, 12:49:36 PM What is that little controller box looking thing in Rarak and k0mpresds' pictures? http://magicmotorsport.com/shop/index.php/magpro2-tools/accessories/breakbox-ver-2-0-without-cables-and-power-supply.html Title: Re: Show Us Your Bench Flashing Setup! Post by: phila_dot on December 10, 2012, 12:56:25 PM http://magicmotorsport.com/shop/index.php/magpro2-tools/accessories/breakbox-ver-2-0-without-cables-and-power-supply.html Cool...thank you Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on December 10, 2012, 12:57:17 PM mine came with the full x17 set up from them. i only ever used it for the x17 but decided i would finally make an rj45 > female obd2 and use it for everything. well, everything but abs modules. ;)
Title: Re: Show Us Your Bench Flashing Setup! Post by: coreyj03 on March 11, 2013, 12:09:28 PM here is my setup with integrated power supply :)
Title: Re: Show Us Your Bench Flashing Setup! Post by: nyet on March 11, 2013, 12:12:21 PM my cluster setup
(https://lh5.googleusercontent.com/-2ZnDtyPRuso/UTzPAVHlAzI/AAAAAAAAINY/0rC4JbPlDDE/s943/IMG_20130310_111852.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: ddillenger on March 11, 2013, 12:56:22 PM Nye-
Are you using a coaxial cable for power? That's clever. I'd have never thought about it. I opened my cable and added a power port so my power supply plugs into my cable. The bench flashing rigs don't need their own supply. Really simplified the wiring. Title: Re: Show Us Your Bench Flashing Setup! Post by: nyet on March 11, 2013, 01:14:50 PM yea, that way i can use a single ps for all of the various cables i have, and its an idiot proof connector, plus i can always use a (readily available) extension if im short.
female is on the live side of course :) Title: Re: Show Us Your Bench Flashing Setup! Post by: coreyj03 on March 11, 2013, 01:41:37 PM how much voltage is too much for the ecus? my ps sometimes goes up to 15.5 votls but it still flashes just fine.
Title: Re: Show Us Your Bench Flashing Setup! Post by: ddillenger on March 11, 2013, 01:46:33 PM 18 is too much. 15.5 is fine.
Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on April 17, 2013, 11:38:21 AM built this med17.5.2 bootmode jig today. :)
(http://i795.photobucket.com/albums/yy231/k0mpresd/C9F232E8-C54A-48FE-8AC1-7D449AEC1370-13763-0000067479C5A3CC.jpg) (http://i795.photobucket.com/albums/yy231/k0mpresd/B50B69C6-2A98-45F9-AC30-184C0F9FFF32-13763-000006747F4DA1CA.jpg) (http://i795.photobucket.com/albums/yy231/k0mpresd/0CFB93C4-3123-41C0-8C95-81A8BADC1AF5-13763-000006796096440E.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: coreyj03 on April 17, 2013, 01:41:22 PM thats a killer setup ian, i didnt know anyone was doing me17 yet.
Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on April 17, 2013, 02:45:50 PM thats a killer setup ian, i didnt know anyone was doing me17 yet. thanks. built that little guy in about 10 minutes and went right on reading the ecu. worked like a champ. ;D Title: Re: Show Us Your Bench Flashing Setup! Post by: k0mpresd on April 24, 2013, 03:41:58 PM boring but made this for med17.1/edc17cp14, should work for med17.5 too.
(http://i795.photobucket.com/albums/yy231/k0mpresd/EB02AAC8-AD44-4547-B8A9-928CE45F49B0-7704-000004004CA016B3.jpg) (http://i795.photobucket.com/albums/yy231/k0mpresd/51BA6895-2824-41A6-8AF7-549DAF3569D0-7704-00000400548F24E9.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: UrbanAssaultar on June 10, 2013, 12:24:47 PM My updated setup
Title: Re: Show Us Your Bench Flashing Setup! Post by: UrbanAssaultar on June 12, 2013, 10:50:31 AM And an updated power supply to go with the new harness!
Title: Re: Show Us Your Bench Flashing Setup! Post by: bennyboi on November 03, 2016, 10:28:19 AM heres mine, excuse the mess, i had just built it
(http://i77.photobucket.com/albums/j80/ben_stringer/1EBF9EEE-E08E-4D47-BC33-8A27D855181C_zpskgbyrngd.jpg) (http://i77.photobucket.com/albums/j80/ben_stringer/C1DA1523-6453-404F-82CE-A1616ADCC164_zpsdtva5bd0.jpg) (http://i77.photobucket.com/albums/j80/ben_stringer/9040C6F7-04BD-403F-A2C6-77A8F835FA0D_zpstbdovoit.jpg) (http://i77.photobucket.com/albums/j80/ben_stringer/B9EE41D0-90EB-4CA4-84DE-0B1C053FB9AE_zpsbqznawdj.jpg) (http://i77.photobucket.com/albums/j80/ben_stringer/CA7D742F-40B3-47E2-B344-795C64B01DFE_zpsoz19nmbf.jpg) (http://i77.photobucket.com/albums/j80/ben_stringer/EC9F969D-C0C2-4C37-B0DD-94027716D3E4_zpsrlcounjl.jpg) (http://i77.photobucket.com/albums/j80/ben_stringer/99CDF101-42D8-4803-A7CD-4B2821EA7C59_zpsepkm501q.jpg) (http://i77.photobucket.com/albums/j80/ben_stringer/47F6D486-A036-4074-8978-824A5A1CFF41_zps4ipnqtmu.jpg) Title: Re: Show Us Your Bench Flashing Setup! Post by: nyet on November 03, 2016, 11:07:53 AM Holy crap that is some seriously awesome overkill.
I approve. Title: Re: Show Us Your Bench Flashing Setup! Post by: Geremia on November 05, 2016, 09:50:57 AM If bench is full, proceed on the floor :)
Title: Re: Show Us Your Bench Flashing Setup! Post by: naach_ on November 06, 2016, 05:24:33 AM good guys, this is my workbench apart from other 12v / 220 adapters for the corresponding software, is a power supply of a desktop PC, with pins for EDC15 and me7, pinned his obd2 connector and so smoothly until the day. ECU then for others, use fgtech V54. I hope you like it
regards Title: Re: Show Us Your Bench Flashing Setup! Post by: bennyboi on November 06, 2016, 12:24:54 PM Holy crap that is some seriously awesome overkill. I approve. cheers ha! wanted to make sure i can easily expand as needed, currently set up with blue cluster, edc16, me7 and me3.8. also have the followings 10" Win 10 tablet cheap ebay Galletto cable Vag k+Can commander - clone Vag tacho - Clone GQ-4x4 prog with adapters for eeprom + psop44. mini usb programmer TL866A Kess V2 master - clone Kess V2 slave - Genuine K-tag Master - clone FGtech V54 Reworked - clone VCDS - 15.2 clone (saving up for Gen) Modified China BDM frame with added bearings. plus a few more bits and pieces laying around. Title: Re: Show Us Your Bench Flashing Setup! Post by: Zenerdiode on November 06, 2016, 02:50:41 PM I hope you like it Complete with Oxy/Acetelene torch for the SMD de-soldering work... ;D Title: Re: Show Us Your Bench Flashing Setup! Post by: Carsinc on November 06, 2016, 07:18:34 PM I think its argon for the tig welder...
Maybe for soldering i feel it overkill Title: Re: Show Us Your Bench Flashing Setup! Post by: naach_ on November 06, 2016, 09:18:56 PM I think its argon for the tig welder... Maybe for soldering i feel it overkill exact! not exaggerate, it is for tig welding machine argon, I really like, exhaust systems, pipes IC. etc recently bought an AC / DC welder and really very happy, good guys eyes! Title: Re: Show Us Your Bench Flashing Setup! Post by: STEVEPHILP on January 11, 2017, 12:47:35 PM Mine is way more ghetto.
Title: Re: Show Us Your Bench Flashing Setup! Post by: bennyboi on February 07, 2017, 08:17:32 AM Mine is way more ghetto. proper Ghetto! love it! which MPPS is that? im looking at adding v18 clone or v16. Title: Re: Show Us Your Bench Flashing Setup! Post by: n0ble on February 21, 2017, 11:00:50 AM If bench is full, proceed on the floor :) What kind of witchcraft is going on with this TCU's? Geremia? Title: Re: Show Us Your Bench Flashing Setup! Post by: vwaudiguy on February 21, 2017, 03:55:50 PM ???
Title: Re: Show Us Your Bench Flashing Setup! Post by: bennyboi on February 22, 2017, 01:16:48 AM ??? looks like a turbo soldering tip cleaner :P Title: Re: Show Us Your Bench Flashing Setup! Post by: naach_ on March 13, 2017, 03:48:28 AM looks like a turbo soldering tip cleaner :P ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D You guys are so bad .... hahahahaha. They are only muscle relaxants for headaches when the projects of the hands escape Title: Re: Show Us Your Bench Flashing Setup! Post by: aef on August 26, 2020, 06:33:38 AM I am looking for both vag part numbers for the yellow repair line with pins on each side for the me7 ecu connector.
small and big pins it must be somewhere on here but i am unable to find it. maybe someone can check in etka. |