NefMoto

Looking for a file for a 2001 Audi s4 6speed. With k04 turbo and 90mm Bosch maf sensor and 440cc injector

Need help figuring it out please help

1) Why did you post it in the definitions file section? I have moved it for you. It doesn't really even belong here.

2) this forum is not for handouts. It is DIY forum.

3) what, exactly, are you trying to "figure out"?

Not a great start. I doubt you'll last long here.

Oh sorry I didn't mean to do that. I just started reading about how I can make my own tune and it says I need a file but I don't know how to make a file? Is there any advice you can get me please?

I literary just finished installing all the hardware in my s4. Don't take me out please  :-[

Do you know anything about engine management? Fuel injection? Forced induction?

Still learning in how to change that. Like I said I just started reading on how to tune. But if you can advice me in anything please send me to the right direction

I already installed the bed moto flash tool on my laptop also the tunerpro. And I followed you on how to install that bed moto flash tool

Nef moto *** sorry autocorrect on my phone

Need help on how to make a file for my stage 3 Audi s4. If anyone want to email me with help this is my email tls1321@live.com
Thanks  :/

Please don't create new threads.

Ask specific questions, and I will answer.

Ok, this is my question. How do I make a file for my car this is my current set up oem Borg warner k04 turbos, 440cc green giant injectors, awe 90mm maf housing with Bosch sensor.
Any help is much appreciated

That is not a specific question.

How can I make the file for my set up?

How on earth is that a specific question?

How is your set up different from stock? If you use the stock file, what works and what doesn't work?

So all I need to do is extract the stock file from the ecu to my pc make the adjustments needed like the Injectors, maf, and turbos?..

How did you plan to do the tuning when you installed the parts?

I don't understand your question. Are asking if I wanted to either flash the ecu or chip? I wanted to flash the ecu initially

?? Help lol


Sent from my iPhone using Tapatalk

So you installed a bunch of parts but didn't have a tuning plan?

I planned a custom tuning from a local tuner but he is not available to tune anymore that's why am looking into it


Sent from my iPhone using Tapatalk

So which items in your new hardware kit do you think require changes in the tune, and why?

The maf sensor is a 90mm. bigger housing.
Injectors are 42lbs or 440cc are bigger than stock. And k04 turbos are bigger than k03s, which means it's flowing more air to the engine.


Sent from my iPhone using Tapatalk

So given that, what obvious maps would need changing right of the bat?

Air to fuel ratio?


Sent from my iPhone using Tapatalk

Will be wrong unless you tell the ECU you changed injectors.

I'm not sure this is the place to teach the most general tuning concepts :/

So what I need to do is extract the stock file into my pc change the Injector size, maf size, and the turbos size?


Sent from my iPhone using Tapatalk

Yes, its only three checkboxes. Nothing more.

Read https://s4wiki.com/wiki/Tuning
Or better search a local tuner in your area and pay him.

The S4 wiki is a great source of information.  A little logic and common sense goes a long way.  Why not use the stock maf and size and start from there?


Sent from my iPhone using Tapatalk

Got my flashing cable today. Hopefully I can do something with it


Sent from my iPhone using Tapatalk