|
Title: NEED Pin for learn key (i will donate you 25$! if pin works) Post by: chasenl on September 03, 2017, 02:27:06 AM Hi Friends,
I have a replacement dash for my Audi TT 8N 1.8T FWD year 2000 but need pin i created a full dump of the new cluster with vagcommander and a dump with vagtacho. If some1 can help me? i think pin of the orig dash is 2193 i need to program my key again If some1 can help me get my car working again will donate you 25$ with paypal Thanks Title: Re: NEED Pin for learn key (i will donate you 25$! if pin works) Post by: aef on September 03, 2017, 04:59:21 AM You have to read MC68HC912DG128 or MC68HC912D60 with programmer or carprog
Title: Re: NEED Pin for learn key (i will donate you 25$! if pin works) Post by: 4ringpieces on September 03, 2017, 12:41:47 PM Read original pin from your engine ecu, that's the easy bit.
these marelli dash clusters hate both vag commander and vag tacho do not write anything with this tools. The vag tacho file is trash. The other file isn't as bad but its still not right. You ebay cluster could be any of the following: 01271 65280 00030 00778 Am i right in thinking your ebay cluster is showing 128000miles roughly? or 206000KM If your Uk based i can do this on the bench without soldering or over the obd port Title: Re: NEED Pin for learn key (i will donate you 25$! if pin works) Post by: chasenl on September 03, 2017, 12:54:37 PM Thanks for you reply i will try the pin tommorow m
Verzonden vanaf mijn iPhone met Tapatalk Title: Re: NEED Pin for learn key (i will donate you 25$! if pin works) Post by: chasenl on September 03, 2017, 12:55:31 PM Thanks for you reply i will try the pin tommorow m Yes the cluster is showing 206kmVerzonden vanaf mijn iPhone met Tapatalk Verzonden vanaf mijn iPhone met Tapatalk |