|
Title: Swapping med9.1 part numbers AXX Vs BWA Post by: Richym on September 05, 2017, 11:15:25 AM i have bought a limited map-pack for a 1k0906115q. With a stage 3 ko4 conversion Bwa engine gti
I was hoping to use it for a 1k0907115 AXX engine gti I can swap the part numbers using Odis engineering to make the older ecu into a 115q From my understanding the only difference is compression ratio. Bwa is slightly lower Anyone done this? Title: Re: Swapping med9.1 part numbers AXX Vs BWA Post by: aef on September 06, 2017, 02:13:36 AM Your car is axx?
But you bought a mappack for another file. Why not transfer the maps/definitions into your file? Title: Re: Swapping med9.1 part numbers AXX Vs BWA Post by: mbkr89 on September 06, 2017, 02:42:35 AM Why not transfer the maps/definitions into your file? I think the same Title: Re: Swapping med9.1 part numbers AXX Vs BWA Post by: Richym on September 06, 2017, 02:46:48 AM bought the map pack for another car.
yes im considering transferring the definitions and maps over, however, not all maps are located in same positions. im also worried about the slight compression ratio difference |