|
Title: me7.5 bricked?? Post by: murfieus on September 12, 2017, 09:52:29 AM hi guys,
i was working on a seat cordoba cupra 1.8t and while writing it, it crashed 2 times!(about 70%) its about a 6k0906032aa / 0261207071 / 29f400bb i had no connection so first i bought another ecu and plugged it in with a stock file an it was running so i tried to write the file again en it crashed again.. then i tried the bootmode(the right way) in the car and on the bench but no luck. then i got a 10k resistor and still didnt get any communication. i only have a kess right now at home and dont have anymore tools or ideas. the odd thing is that the file came from an ibiza and this was already running in a other car. and the first ecu had a running file also from an ibiza but this was a stage1 and the new file is a stage2. i dont have the tools to de-solder it and progam it again and the only thing i have is a vcds cable and the kess(complete with bootloader). so i have now 2 ecu to try more ideas. hope you guys can help me with this! Title: Re: me7.5 bricked?? Post by: adam- on September 12, 2017, 10:17:25 AM Why don't you make your own stage 2?
Title: Re: me7.5 bricked?? Post by: murfieus on September 12, 2017, 02:57:55 PM not learned enough to try that and dont wont things to get broken just liked the other 2 ;D
Title: Re: me7.5 bricked?? Post by: aef on September 13, 2017, 05:12:13 AM have u tried writing with nefmoto?
have you tried reading the eeprom to check is bootmode works in general? have you tried the with your cables serial in galletto exe? I have seen kess once and its a pain with all the popups, turn ignition on, turn it off, turn it on.... you will never know when its time to turn on for the bootmode :D Title: Re: me7.5 bricked?? Post by: sonique on September 13, 2017, 05:38:16 AM hi guys, i was working on a seat cordoba cupra 1.8t and while writing it, it crashed 2 times!(about 70%) its about a 6k0906032aa / 0261207071 / 29f400bb i had no connection so first i bought another ecu and plugged it in with a stock file an it was running so i tried to write the file again en it crashed again.. then i tried the bootmode(the right way) in the car and on the bench but no luck. then i got a 10k resistor and still didnt get any communication. i only have a kess right now at home and dont have anymore tools or ideas. the odd thing is that the file came from an ibiza and this was already running in a other car. and the first ecu had a running file also from an ibiza but this was a stage1 and the new file is a stage2. i dont have the tools to de-solder it and progam it again and the only thing i have is a vcds cable and the kess(complete with bootloader). so i have now 2 ecu to try more ideas. hope you guys can help me with this! 100% original 29f400BB flash ? because many time change flash 400BT this flash not possible many tool write 100%, 70-98% dropped connection Title: Re: me7.5 bricked?? Post by: murfieus on September 13, 2017, 01:17:19 PM I think its the flash was a BT because it stops at 80% 2 times. Im going to try with the nefmoto and cable tomorrow. And your right about the kess because it doesnt show anything. I read it with vcds and it says this-is-the-ram-progam.
Title: Re: me7.5 bricked?? Post by: murfieus on September 17, 2017, 01:13:08 PM i solved it!
just made a bench with the 121 pin and in bootmode , i used the kess with obd2 plug and it write the ori file and stage 2 file. Title: Re: me7.5 bricked?? Post by: murfieus on September 17, 2017, 01:16:14 PM but now the next problem is that i cant connect nefmoto with my rosstech cable. it say something about the ftdi chip. i installed the driver and try al methods i know but still not working. bootmode doesnt work either.
any more ideas?? |