|
Title: edc15p fried Post by: sessionback on September 22, 2017, 07:29:53 AM Hello!
I need some help pls! While i was trying to read EDC15P in boot mode ive connected ground at pin 23 (am29f400); Vdd at c167cr mcu. After that i cant no more read ecu on bench. Ive removed and replaced flash (old one was unable to read on external programmer). I think ive fried mcu. How can i now that? Can't read on bench. In the car, car dont start. Thanks a lot Title: Re: edc15p fried Post by: IamwhoIam on September 22, 2017, 08:39:12 AM buy a new ECU
Title: Re: edc15p fried Post by: turbojohan on September 22, 2017, 10:32:28 AM or buy used ecu and put your eeprom and flash on it.
Trying to repair you fried one will cost more.. Title: Re: edc15p fried Post by: sessionback on September 22, 2017, 03:06:04 PM what external programmer can read this type of mcu?
Title: Re: edc15p fried Post by: jochen_145 on November 03, 2017, 10:40:17 AM Why you tryed to read edc15p in bootmode ?
EDC15P can be read on bench with normal OBD-protocoll. Ever tryed to re-cover the flash with MPPS or equal tool ? Normaly you don´t need to solder and wirte on ex eeprom tool. As long as the flash is just brigged or empty, you can re-cover with MPPS on bench |