|
Title: Changing a 6spd map to Tip Post by: b5_nick on October 12, 2017, 08:16:20 AM Hello all,
I've been trying to give the NVR Stage 2++ tune a try (MY2000 s4, tiptronic) and after trying forever to figure out why I was unable to see the attachments on the thread about this file, I finally found a download to it on myaudis4.com . However, it's for a m box which is 6 speed and I have a b box, being tiptronic. I should be able to figure out how to change the MAF coding for bosch and hopefully the ABS/ESP as well (my year didn't come with ESP) as that is covered widely on this forum, but my question is, is it possible to code the m box software to be used on a tip? I have not been able to find any info about this so any help is greatly appreciated. Thanks in advance! ** I have attached the file that my buddy who has been helping me with tuning has been using as stock (L-box modified to B-box specs) as well as the file I would like to convert. Title: Re: Changing a 6spd map to Tip Post by: nyet on October 12, 2017, 08:44:18 AM is it possible to code the m box software to be used on a tip? No. Title: Re: Changing a 6spd map to Tip Post by: b5_nick on October 12, 2017, 08:46:57 AM I know you can typically use VCDS to recode between manual and auto... so you're telling me this isn't possible in this case?
Title: Re: Changing a 6spd map to Tip Post by: vwaudiguy on October 12, 2017, 01:31:45 PM I know you can typically use VCDS to recode between manual and auto... so you're telling me this isn't possible in this case? That's what he said. Title: Re: Changing a 6spd map to Tip Post by: nyet on October 12, 2017, 02:00:22 PM I know you can typically use VCDS to recode between manual and auto... so you're telling me this isn't possible in this case? Works with 4z7 and 4b0 ME7.1 files but not 8D0 files. Title: Re: Changing a 6spd map to Tip Post by: b5_nick on October 12, 2017, 03:03:46 PM Ok, thanks so much nyet for the helpful input. Does anybody know where I can find the L-box file? I was literally up all night searching and reading through that thread to no avail.
Title: Re: Changing a 6spd map to Tip Post by: nyet on October 12, 2017, 03:07:59 PM Did you check the sticky in the ECU files section?
http://nefariousmotorsports.com/forum/index.php?topic=5700.0title= Title: Re: Changing a 6spd map to Tip Post by: b5_nick on October 12, 2017, 03:15:43 PM Just took a look at that, but that thread is for stock files.
What I am looking for is a tip version of the NVR Stage 2 file to play with. If I’m not mistaken, the servers on this forum ran out of space and they had to take down many files at one point to restore space. ( http://nefariousmotorsports.com/forum/index.php?topic=6562.0 ) I’m assuming that is why I can’t see any attached files in this thread: http://nefariousmotorsports.com/forum/index.php?topic=1065.240 Title: Re: Changing a 6spd map to Tip Post by: nyet on October 12, 2017, 03:31:13 PM Just took a look at that, but that thread is for stock files. What I am looking for is a tip version of the NVR Stage 2 file to play with. If I’m not mistaken, the servers on this forum ran out of space and they had to take down many files at one point to restore space. ( http://nefariousmotorsports.com/forum/index.php?topic=6562.0 ) I’m assuming that is why I can’t see any attached files in this thread: http://nefariousmotorsports.com/forum/index.php?topic=1065.240 take the stock l box file and copy the maps over one by one. May as well learn how to use winols (or tuner pro) anyway. It will be a good exercise. Title: Re: Changing a 6spd map to Tip Post by: b5_nick on October 12, 2017, 03:35:33 PM I suppose that is what I'll have to resort to. Thanks again for helping out a n00b. +1. :)
|