|
Title: Golf 4 2.3 V5 Post by: banoo on November 02, 2017, 01:51:28 PM I search many in this forum and others but I cant find similar dump like this.In Winols I cant syncronize with other dump..Please when you have correct definition to this dump share with me. BOSCH ME7.1
ECU-NR:066906032AG 0261207375 SW:362307 Title: Re: Golf 4 2.3 V5 Post by: banoo on November 08, 2017, 11:17:19 AM I will help you finding your needed maps this afternoon. ;) Don't contact me via private message again, so others could learn. ;) [/quote Thank you for helping,engine is in his place,ready to start :) Title: Re: Golf 4 2.3 V5 Post by: banoo on November 08, 2017, 02:16:38 PM First of all: What maps do you need? For me is enough for disable cat and second lamda,evap,secondary airpump,and canbus off(IC,ABS)and DTC table.That is not a small work,I know. Title: Re: Golf 4 2.3 V5 Post by: banoo on November 08, 2017, 03:18:16 PM For me is enough for disable cat and second lamda,evap,secondary airpump,and canbus off(IC,ABS)and DTC table.That is not a small work,I know. The DTC off I can understand how it work,thanks for good description for Tony Title: Re: Golf 4 2.3 V5 Post by: banoo on November 09, 2017, 10:59:38 AM The DTC off I can understand how it work,thanks for good description for Tony For search for dtc:Errorclasstable at 106E3,VAG errorclasstable at 14644 in this dump Title: Re: Golf 4 2.3 V5 Post by: banoo on November 09, 2017, 01:39:50 PM Disable rear cat DTC: CWDLSAHK is at 185A3 CDKAT is somewhere at 181A2 Disable SAI DTC: CDSLS is at 181B0 CWKONABG is at 181BA MSLUB is at 1A3A2 MSLBAS is somewhere at 1838F It wasn't a big deal finding these with a basic Me7.5 and Me7.1 definition, you just have to find the correct offset... I've got the maps from here... https://s4wiki.com/wiki/Tuning#DTC_disables Some bytes are nearly to his description,some are far away,so this is not clear to me. Title: Re: Golf 4 2.3 V5 Post by: banoo on November 09, 2017, 01:59:35 PM You know that every ecu is different? There are even differences between the Me7.1 ecu's of a 2.3 V5. ::) => I took your file => Imported it into WinOls => Opened a Me7.5 defintion next to it => Aligned both windows => And searched for correct offsets with help of the search function => For some offsets I needed a Me7.1 definition => That's what came out, the offsets I found were pretty good and clear You can search yourself again if you want... ::) Thank you for patience to me,I search sure,my plan is to learn that type ecu. Title: Re: Golf 4 2.3 V5 Post by: banoo on November 09, 2017, 03:37:32 PM Me7.1 I have similar,but me7.5 what piece you open?send me please the link,I cant this make bad :D
|