|
Title: Enrichment on WOT in Audi S3 AMK Post by: torixon on November 09, 2017, 04:09:19 PM Hello dear colleagues,
May I ask you about enrichment on WOT for Audi S3 0261206794 8N0906018J sw360314 LAMFA map is filled with 1.00, and the axis is not logical for me. 0% = enriched, 100% = stoich? Please see attached screenshot. I would like to give LAMFA 0.84 for WOT. May I kindly ask you for the support? Title: Re: Enrichment on WOT in Audi S3 AMK Post by: Hanzo on November 09, 2017, 04:40:50 PM You have a bad load axis. Search information in the forum.
regards Title: Re: Enrichment on WOT in Audi S3 AMK Post by: torixon on November 09, 2017, 04:44:02 PM Thank you sir!
I have already edited the axis :) it means that 0% load = little enrichment 100 % load = stoich? Title: Re: Enrichment on WOT in Audi S3 AMK Post by: KasperH on November 09, 2017, 05:33:28 PM Columns are %Pedal.
Rows are RPM. Cell data is lambda. And it looks like your map is bass ackwards. Title: Re: Enrichment on WOT in Audi S3 AMK Post by: torixon on November 12, 2017, 01:50:06 AM Thank you KasperH for your reply. Do you expect that the 1) x-axis is wrong (the enrichment is on 100% pedal) 2) x-axis is correct (there is no enrichment for 100% Pedal) Title: Re: Enrichment on WOT in Audi S3 AMK Post by: aef on November 12, 2017, 04:18:57 AM hm?
you can switch map and axis with ctrl+t Title: Re: Enrichment on WOT in Audi S3 AMK Post by: KasperH on November 12, 2017, 08:36:22 AM Thank you KasperH for your reply. Do you expect that the 1) x-axis is wrong (the enrichment is on 100% pedal) 2) x-axis is correct (there is no enrichment for 100% Pedal) The 0.95 lambda column should be at 100% pedal. Title: Re: Enrichment on WOT in Audi S3 AMK Post by: torixon on November 13, 2017, 12:16:59 PM hm? you can switch map and axis with ctrl+t Hello aef, The swap axis (ctrl+t) does only exchange X and Y axis. The 0,95 is still on 0% PWG (see the second post - KasperH) KasperH, logically, yes, but in the map is not correct. When I use ECM, the 0,95 is on the 100%PWG Title: Re: Enrichment on WOT in Audi S3 AMK Post by: IamwhoIam on November 13, 2017, 03:00:01 PM Shift the start of your map by one byte (+1, so if it's at 18861, make that 18862 for example) and your problem is solved.
I could have given you the correct address for the map in your file, but you already have an A2L of some kind, and this is enough spoonfeeding for a complete noob who hasn't done his research nor contributed anything to the community (yet). Title: Re: Enrichment on WOT in Audi S3 AMK Post by: nyet on November 13, 2017, 03:25:39 PM One more time maps are almost always 2 byte aligned
Title: Re: Enrichment on WOT in Audi S3 AMK Post by: SB_GLI on November 13, 2017, 03:59:27 PM One more time maps are almost always 2 byte aligned boom Title: Re: Enrichment on WOT in Audi S3 AMK Post by: 1vanchik on November 13, 2017, 04:39:36 PM Shift the start of your map by one byte (+1, so if it's at 18861, make that 18862 for example) and your problem is solved. I also did this in my maps.I could have given you the correct address for the map in your file, but you already have an A2L of some kind, and this is enough spoonfeeding for a complete noob who hasn't done his research nor contributed anything to the community (yet). |