|
Title: how to immo off mk4 jetta 1.8T Post by: birchbark506 on November 11, 2017, 03:10:53 PM i am trying to immo off ECU 06A 906 032 CL would BMD work?
Title: Re: how to immo off mk4 jetta 1.8T Post by: vwaudiguy on November 11, 2017, 08:28:55 PM i am trying to immo off ECU 06A 906 032 CL would BMD work? No. Have you looked at the board? Do you see a BDM pad? :) Title: Re: how to immo off mk4 jetta 1.8T Post by: birchbark506 on November 11, 2017, 11:37:38 PM i didn't think it would work, i did not see the pads just asked before i removed the cover, what reader would i need?
Title: Re: how to immo off mk4 jetta 1.8T Post by: adam- on November 12, 2017, 01:03:10 AM Just bootmode it. It's all documented.
Title: Re: how to immo off mk4 jetta 1.8T Post by: birchbark506 on November 12, 2017, 01:04:39 AM i only have bdm and mpps cord and ross tech cable
Title: Re: how to immo off mk4 jetta 1.8T Post by: adam- on November 12, 2017, 01:22:34 AM Ross-tech in dumb mode.
Title: Re: how to immo off mk4 jetta 1.8T Post by: _nameless on November 12, 2017, 11:29:00 AM that wont work it still shows up as a usb cable that only works for nefmoto. you need a serial simulator with a ft232rl chipset or hot air it an use a burner.
Title: Re: how to immo off mk4 jetta 1.8T Post by: adam- on November 12, 2017, 11:36:46 AM God damn know it all.
Title: Re: how to immo off mk4 jetta 1.8T Post by: k0mpresd on November 12, 2017, 02:25:11 PM that wont work it still shows up as a usb cable that only works for nefmoto. you need a serial simulator with a ft232rl chipset or hot air it an use a burner. it works. "load vcp". Title: Re: how to immo off mk4 jetta 1.8T Post by: birchbark506 on November 13, 2017, 02:34:39 PM so i end up getting the file off with mpps cord and pulling the dash fuse (5A) now where would one find the immo at to disable it?
Title: Re: how to immo off mk4 jetta 1.8T Post by: _nameless on November 17, 2017, 12:37:04 PM so i end up getting the file off with mpps cord and pulling the dash fuse (5A) now where would one find the immo at to disable it? you wont. you need to read the eeprom. Title: Re: how to immo off mk4 jetta 1.8T Post by: Gonzo on November 18, 2017, 03:04:41 AM Original MPPS reads and writes eeprom thru bootmode and I beleieve it can do it now via OBD.
Title: Re: how to immo off mk4 jetta 1.8T Post by: birchbark506 on November 18, 2017, 03:22:52 AM Yes I end up getting it to pull the file off had to pull the dash fuse 5A and was able to Immo off the file and it worked coding it out of the 512kb file using mpps cable
|