NefMoto

Noob Zone => Noob Questions => Topic started by: murfieus on December 05, 2017, 07:58:24 PM



Title: error in throttle after flashing back to ori
Post by: murfieus on December 05, 2017, 07:58:24 PM
hi guys, hope someone can help me with this
my mk5 golf gti 2.0tfsi dsg med9.1 gives an throttle error after i wrote the ori file back and doesnt responce on the gaspedal. i tryed an tuned file with a other letter at the end.

ori 1k0907115A and tuned 1k0907115J.

i did a ori fullread and checksums were OK. then i fullwrote the tuned file and it gives some shocks at full load but it drives ok with part throttle so i did a throttle bassicsettings and an adaption but still the same issue.
so i fullwrote the ori back and now it wont responce and have a bad idle. i tryed the bassicsettings and adoptions but still no luck.
it has a dtc in the throttle and it says error when i try the basicsettings. its acting like i have put a wrong ecu in it but i only changed the files.

i use mppsv16 to read and write.

thnks!


Title: Re: error in throttle after flashing back to ori
Post by: gman86 on December 06, 2017, 12:51:03 AM
hi guys, hope someone can help me with this
my mk5 golf gti 2.0tfsi dsg med9.1 gives an throttle error after i wrote the ori file back and doesnt responce on the gaspedal. i tryed an tuned file with a other letter at the end.

ori 1k0907115A and tuned 1k0907115J.

i did a ori fullread and checksums were OK. then i fullwrote the tuned file and it gives some shocks at full load but it drives ok with part throttle so i did a throttle bassicsettings and an adaption but still the same issue.
so i fullwrote the ori back and now it wont responce and have a bad idle. i tryed the bassicsettings and adoptions but still no luck.
it has a dtc in the throttle and it says error when i try the basicsettings. its acting like i have put a wrong ecu in it but i only changed the files.

i use mppsv16 to read and write.

thnks!

Sounds like it has the wrong file. BDM it back in.


Title: Re: error in throttle after flashing back to ori
Post by: murfieus on December 06, 2017, 01:19:33 AM
Dont have bdm yet but car can drive with the 115J file but not propperly , tried some other ori files but react the same.


Title: Re: error in throttle after flashing back to ori
Post by: adam- on December 06, 2017, 04:20:54 AM
Stop flashing random ORIs on?  I assume the tuned file isn't yours either?


Title: Re: error in throttle after flashing back to ori
Post by: murfieus on December 06, 2017, 05:13:53 AM
I know, it doesnt work , but wanted to be sure. File is mine but didnt have a damos for the 115a , i thought just give it a try but didnt go well


Title: Re: error in throttle after flashing back to ori
Post by: gman86 on December 06, 2017, 05:57:40 PM
If you're happy to risk bricking it entirely flashing random files on, try putting the 115J file back to stock and see how that goes. Don't be surprised if you find random fault codes or strange behaviour though


Title: Re: error in throttle after flashing back to ori
Post by: murfieus on December 10, 2017, 08:44:51 AM
i splitted both files and paste the 115a in the 115j and it drives propperly now and can learn the throttle again


Title: Re: error in throttle after flashing back to ori
Post by: adam- on December 10, 2017, 09:19:48 AM
What the fuck.