|
Title: 8N0906018BB TABGSS Post by: 6L20vt on December 18, 2017, 03:48:36 AM hello, could someone help me find tabgs in the bin 8N0906018BB, I compared with 5 files of 1.8 225hp and 210hp and I can not find the correspondence in this.
I can not upload the .bin due to problems with the forum server Title: Re: 8N0906018BB TABGSS Post by: vwaudiguy on December 18, 2017, 02:39:14 PM KFTABGSS @ 1D3C0 / 8x8 / factor 0.019531
This is for 366834 (you didn't specify) Title: Re: 8N0906018BB TABGSS Post by: 6L20vt on December 18, 2017, 03:23:11 PM KFTABGSS @ 1D3C0 / 8x8 / factor 0.019531 This is for 366834 (you didn't specify) hello thank you for your answer, I mean tabgss that is 1x1, I'm trying to remove the egt sensor Title: Re: 8N0906018BB TABGSS Post by: vwaudiguy on December 18, 2017, 03:34:11 PM Didn't see TABGSS in that binary. I believe it went from a single value to a map. I'll check again later tonight when I have more time.
Title: Re: 8N0906018BB TABGSS Post by: 6L20vt on December 18, 2017, 03:38:14 PM Didn't see TABGSS in that binary. I believe it went from a single value to a map. I'll check again later tonight when I have more time. I have not been able to find it, but if there is another way to cancel the egt system and make it work by calculated temperature, I would appreciate it if you could explain it to me. I want to try this bin in a car without egt, that's the reason. thanks for your help Title: Re: 8N0906018BB TABGSS Post by: 6L20vt on December 18, 2017, 07:20:59 PM http://nefariousmotorsports.com/forum/index.php?topic=891.0
looking for some information, I found this, in this post they say that there are .bin that use kftabgss. Do you think that can be the key? Title: Re: 8N0906018BB TABGSS Post by: vwaudiguy on December 18, 2017, 11:24:34 PM I have not been able to find it, but if there is another way to cancel the egt system and make it work by calculated temperature, I would appreciate it if you could explain it to me. I want to try this bin in a car without egt, that's the reason. thanks for your help Have you read the wiki? Title: Re: 8N0906018BB TABGSS Post by: 6L20vt on December 19, 2017, 04:31:31 AM Have you read the wiki? yes, in the wiki talk of tabgss,that's the reason why I look for it, I have canceled in others .bin that function, but in this case I do not know if I should maximize the complete map as they suggest in the post I indicated above. Thanks for your help. Title: Re: 8N0906018BB TABGSS Post by: vwaudiguy on December 19, 2017, 11:43:41 AM From the Wiki...
Title: Re: 8N0906018BB TABGSS Post by: 6L20vt on December 19, 2017, 12:00:08 PM From the Wiki... Title: Re: 8N0906018BB TABGSS Post by: 6L20vt on December 19, 2017, 12:02:23 PM Alternately, setting both of these to their maximum (1229) may help: [69]
TABGSS (0x1C514) and TABGSS2 (0x1C516) - Desired exhaust gas temperature for EGT regulation Title: Re: 8N0906018BB TABGSS Post by: vwaudiguy on December 19, 2017, 12:46:00 PM Alternately, setting both of these to their maximum (1229) may help: [69] TABGSS (0x1C514) and TABGSS2 (0x1C516) - Desired exhaust gas temperature for EGT regulation Right. As an alternative. May help, but not needed if you disable the entire function like I suggested. Keep in mind, most of the wiki revolves around ME7.1 and yours is 7.5 so not everything is going to be exactly the same. Not to mention your binary does not have TABGSS as a single value, but as a map. Title: Re: 8N0906018BB TABGSS Post by: 6L20vt on January 05, 2018, 07:37:07 AM i raise all map, and work fine thanks ;)
Title: Re: 8N0906018BB TABGSS Post by: vwaudiguy on January 05, 2018, 10:27:28 AM i raise all map, and work fine thanks ;) Thanks for following up. Title: Re: 8N0906018BB TABGSS Post by: sonique on January 05, 2018, 01:54:42 PM me7.5 and s4 wiki me7.1 egt diasble not same ..
me7.1 with egt bts fuel working but me7.5 not need bts fueling enable |