|
Title: me3.8.3 maf linearisation Post by: Adrianb on December 24, 2017, 02:38:32 AM Hello,
can anyone help me with maf linearisation on this ecu? It´s 150HP AGU engine and I have VR6 housing from mk3 and stock AGU sensor. I tried copy MLHFM map from vr6 file, but this is not good. Maybe someone have a tested solution here ??? Thanks for any help :) Title: Re: me3.8.3 maf linearisation Post by: ulek3pl on December 24, 2017, 05:36:09 AM what is wrong? i never tried do this. when i back home i send u exponential map for vr6 housing.
Title: Re: me3.8.3 maf linearisation Post by: Adrianb on December 24, 2017, 06:06:35 AM with vr6 mlhfm and housing
- idle is lean (with stock map and stock maf housing it is OK) - WOT maf readings are about 20g/s higher than stock so this copy/paste method is not clear thank you so much :) Title: Re: me3.8.3 maf linearisation Post by: ulek3pl on December 24, 2017, 02:07:36 PM Try this friend (Expon Scaling in this file) ;)
Title: Re: me3.8.3 maf linearisation Post by: eliotroyano on December 24, 2017, 08:59:32 PM Scaling calculation is just an approximation. It would not be 100% precise. You can tweak data according to your readings or I can suggest you use a whole OBD1 VR6 MAF with it MLHFM data ;) ;) ;) ;) ;)
|