|
Title: TFSI WITH FORGET WASTGATE Post by: chiptuner123 on December 29, 2017, 12:43:55 AM this car audi s3 is stage 1 but with forget wastgate,that make boost 1.5bar over and 1.1 stable.
The problem is that at full throttle and 3500rpm make big overboost 1,6bar for 2 seconds and drops down to 1bar,and then rise to 1,1 1,2bar at 5000rpm Title: Re: TFSI WITH FORGET WASTGATE Post by: chiptuner123 on December 29, 2017, 01:31:38 AM ecu 8P0907115H
I make all other tuning exept The LDRXN x6,the KFLDIMX ,KFLDRL I am not touch it is original without mods.Because of strong forget WG spring the problem is the non linear boost pressure, Title: Re: TFSI WITH FORGET WASTGATE Post by: fknbrkn on December 29, 2017, 03:20:35 AM R u retarded?
Title: Re: TFSI WITH FORGET WASTGATE Post by: gman86 on December 29, 2017, 03:34:12 AM ecu 8P0907115H I make all other tuning exept The LDRXN x6,the KFLDIMX ,KFLDRL I am not touch it is original without mods.Because of strong forget WG spring the problem is the non linear boost pressure, You make all other tuning apart from the load and pressure regulation maps? wtf Title: Re: TFSI WITH FORGET WASTGATE Post by: chiptuner123 on December 29, 2017, 03:44:27 AM YES all other maps ok
Title: Re: TFSI WITH FORGET WASTGATE Post by: gman86 on December 29, 2017, 03:48:21 AM YES all other maps ok Post your file, for the bants Title: Re: TFSI WITH FORGET WASTGATE Post by: vwaudiguy on December 29, 2017, 09:39:57 AM Serious contender for best thread of 2018.
Title: Re: TFSI WITH FORGET WASTGATE Post by: Khendal on December 30, 2017, 06:04:22 AM What are you using for chart ?
Title: Re: TFSI WITH FORGET WASTGATE Post by: chiptuner123 on December 30, 2017, 06:12:55 AM I solve it thanks to all. good 2018 to all of you :)..................
|