|
Title: immo2 ecu in immo3 car. Post by: marcello7x on January 06, 2012, 11:00:24 PM What needs to be done? Is the eeprom dump on an immo2 similar to the 3? Can I use the same immo 3 disable method on this.
Title: Re: immo2 ecu in immo3 car. Post by: thom337 on January 07, 2012, 04:59:26 PM you can use the same method.... or if I recall, you can perform and adaptation using VAG-COM that doesn't require an SKC. The SKC's are for IMMO 3.
Title: Re: immo2 ecu in immo3 car. Post by: marcello7x on January 08, 2012, 05:26:52 PM I know you can in a fully immo2 car, not sure about the mix and match.
Title: Re: immo2 ecu in immo3 car. Post by: Gonzo on January 08, 2012, 06:50:08 PM You just need to adapt cluster to ECU and it will work.
|