|
Title: What ECU can i use to replace mine? Post by: professor on January 10, 2012, 03:17:28 AM Well in case my ECu is faulty or damaged etc what ECU can i use to replace it (except of the same one :P)?
My MY2005 car runs with the management of an Bosch ME7.5 0261208521 or vag part number 06A906032RP ECU. Thanks in advance! Title: Re: What ECU can i use to replace mine? Post by: professor on January 11, 2012, 09:17:17 AM No one can help?
As far as i know 032QN and 032TL will work. Do you know what other codes will match my 032RP ecu? Title: Re: What ECU can i use to replace mine? Post by: createddeleted on January 11, 2012, 09:33:53 AM Well in case my ECu is faulty or damaged etc what ECU can i use to replace it (except of the same one :P)? My MY2005 car runs with the management of an Bosch ME7.5 0261208521 or vag part number 06A906032RP ECU. Thanks in advance! 1.8t AWP? If so you can use any wideband ecu with the correct immo defeated. Such as mine was an RN and I've been using PL and HN stuff. Title: Re: What ECU can i use to replace mine? Post by: professor on January 11, 2012, 09:50:12 AM No its an 1.8T 20V BBU motor.
Title: Re: What ECU can i use to replace mine? Post by: professor on January 15, 2012, 11:13:22 AM Really i am looking for an answer to my problem.
My car is a mk4 ibiza 1.8T 20V with BBU engine MY2005. The 06A906032RP ecu ME7.5 doesnt work. Is drived by wire, wideband, FWD and probably having immo3. I do have the flash file which was working without problems. I do not have the eeprom data. What ECU part number can i use to replace it and how this can be done? Any help is more than welcome. Thanks for reading this. Title: Re: What ECU can i use to replace mine? Post by: professor on February 27, 2012, 03:16:36 AM According to this (http://atmstech.gicp.net/%C7%FD%B6%AF/OBD/VCDS/Labels/06-01.lbl), only 9N could be used for switched over.
Well i ll attach it over here cause i think is useful. Title: Re: What ECU can i use to replace mine? Post by: marcello7x on March 01, 2012, 01:04:45 PM I tend to make posts then answer my own question with more research. props for posting your findings to help others.
Title: Re: What ECU can i use to replace mine? Post by: professor on March 01, 2012, 01:09:16 PM Ty and i confirm that 032QN (9N) ECU does work ok replacing 032RP (9N), by trying it my self.
Title: Re: What ECU can i use to replace mine? Post by: . on September 10, 2015, 12:44:40 PM Hello professor, can you post your 06A906032rp flash and eeprom?,i want try this combination in my bjx engine.thanks
Title: Re: What ECU can i use to replace mine? Post by: slappynuts on September 10, 2015, 08:07:45 PM More info needed, is the car a wideband? 512 or 1024k? VVT?
|