|
Title: Me7 logger crashs when I try to take a log.... Post by: Manford on February 07, 2018, 01:11:07 PM i have a .cfg file to take logs but when I try and take them it crashs and comes up with the attached errors, if i drop the number of parameters being logged it appears to work ok, although looking at my logs in ecuxplot they look like jibberish at the moment, but im not convinced they are being logged properly in the first place.
Any thoughts? Title: Re: Me7 logger crashs when I try to take a log.... Post by: nyet on February 07, 2018, 01:17:48 PM Dont use the front end, make sure the command line works first.
Title: Re: Me7 logger crashs when I try to take a log.... Post by: jimmcgee5 on February 07, 2018, 01:26:58 PM the config file you are using is set for , ECUCharacteristics = 8E0909518AK 0003 torque modv4 test.ecu , you need to create your own config , from your ecu file .
Title: Re: Me7 logger crashs when I try to take a log.... Post by: jimmcgee5 on February 07, 2018, 01:32:37 PM and this should give you the correct parameters to log , just remember to create your ecu file .
Title: Re: Me7 logger crashs when I try to take a log.... Post by: Manford on February 07, 2018, 02:00:58 PM and this should give you the correct parameters to log , just remember to create your ecu file . I did create my own ecu, il ha w to double check what’s going on, hopefully sorting the ecu issue will fix both my current issues Sent from my iPhone using Tapatalk Title: Re: Me7 logger crashs when I try to take a log.... Post by: Manford on February 08, 2018, 03:03:19 AM With both configs the logger says its using my ecu file as the reference?
Title: Re: Me7 logger crashs when I try to take a log.... Post by: jimmcgee5 on February 08, 2018, 03:56:46 AM are you making these live , so they show on the screen as you log , I don't have any live logging , well maybe afr and rpm , but I can log everything in that cfg to a log file .
jim Title: Re: Me7 logger crashs when I try to take a log.... Post by: jimmcgee5 on February 08, 2018, 04:03:13 AM ;D just noticed you are , turn off all the variables apart from 1 or 2 , you should be keeping your eyes on the road :P
Title: Re: Me7 logger crashs when I try to take a log.... Post by: Manford on February 08, 2018, 04:08:19 AM So only log, Lamsoni_w, lamsbg_w, rpm and wped_w on a single pull?
Then drop Lamsoni_w, LAmsbg_w and replace with Pus_w and pvdks_w on another run? I dont want so see anything when driving, just push a button, log the info, two or three runs and review once I get home..... |