|
Title: ME7.5 wont open Post by: 03GTI on February 09, 2018, 07:13:57 PM this is my log file the ECU is on a test bench can anyone point me in the right direction?
09/Feb/2018 09:12:40.766: LOG: Opened FTDI device. 09/Feb/2018 09:12:40.879: LOG: FTDI device info - Description: FT232R USB UART Serial Number: AH065EBS Device Type: FT_DEVICE_232R ID: 0x4036001 Device Flags: 0x0 09/Feb/2018 09:12:40.886: LOG: FTDI ChipID DLL is loaded, checking chip ID... 09/Feb/2018 09:12:40.890: LOG: FTDI device chip ID: 0x7AA6755B 09/Feb/2018 09:12:40.898: USER: Validated FTDI device is in dumb mode. 09/Feb/2018 09:12:40.961: LOG: Starting send receive thread. 09/Feb/2018 09:12:40.969: LOG: Send receive thread now started. 09/Feb/2018 09:12:40.974: USER: Disconnected 09/Feb/2018 09:12:40.985: LOG: Setting communication timings to defaults. 09/Feb/2018 09:12:40.990: USER: Connecting... 09/Feb/2018 09:12:40.997: LOG: Setting communication timings to defaults. 09/Feb/2018 09:12:41.004: USER: Starting slow init connection. 09/Feb/2018 09:12:43.610: USER: Connecting to address 0x01. 09/Feb/2018 09:12:46.413: LOG: Failed to read sync byte, guessing baud rate is actually 9600. 09/Feb/2018 09:12:46.455: LOG: Not enough key bytes, read: 0 09/Feb/2018 09:12:46.460: USER: Slow init failed. 09/Feb/2018 09:12:46.467: USER: Disconnected 09/Feb/2018 09:12:46.476: LOG: Setting communication timings to defaults. 09/Feb/2018 09:12:46.487: LOG: Closing FTDI device. 09/Feb/2018 09:12:46.543: LOG: Send receive thread now terminated. Title: Re: ME7.5 wont open Post by: IamwhoIam on February 10, 2018, 01:49:22 AM Open ECU and put it in boot mode.
Title: Re: ME7.5 wont open Post by: _nameless on February 10, 2018, 05:19:37 AM You sure k line is hooked up?
|