NefMoto

Technical => Tuning => Topic started by: Pepe on February 10, 2018, 02:02:27 AM



Title: A4 b5 tdi Edc15 brake light switch coding/delete
Post by: Pepe on February 10, 2018, 02:02:27 AM
Hi folks

I have an Audi A4 b5 tdi with the Edc15 ECU and it has fault code

16955/P0571/001393 - Brake Light Switch (F): Implausible Signal

I have replaced it about 4 times, changed every single bulb, checked all wiring and connectors and still the code persists, I fear it might be a problem with the clocks? you cannot delete it as soon as you press clear it reappears, brake lights work perfectly, but obviously cruise no longer does!

I was wondering if there is a way to code this out as it activated the flow plug warning light and it’s annoying as hell and also prevents me from being alerted if there is a real issue with the car!

If I could code this out and keep cruise that would be amazing!

Thanks in advance!


Title: Re: A4 b5 tdi Edc15 brake light switch coding/delete
Post by: HelperD on February 10, 2018, 02:26:23 AM
Ah, so disregard my comment in your first post :P

Have you tried changing out the ECU? I have seen a bad board do this a few times.

Christian


Title: Re: A4 b5 tdi Edc15 brake light switch coding/delete
Post by: Pepe on February 12, 2018, 02:29:52 AM
Hi,
Thanks for the advice, I have not tried an ecu yet, but I hav noticed they can be had fairly cheaply

Would I need to do an immo defeat on this version of ecuif I was to swap it out? (I know on some early 2000’s vag stuff it can be done in VCDS)

Cheers


Title: Re: A4 b5 tdi Edc15 brake light switch coding/delete
Post by: _nameless on February 12, 2018, 05:24:43 AM
(I know on some early 2000’s vag stuff it can be done in VCDS)

Cheers
Well then you dont knkw too much because youd be wrong. Immo off has nothing at all to do with vcds


Title: Re: A4 b5 tdi Edc15 brake light switch coding/delete
Post by: HelperD on February 14, 2018, 12:28:00 AM
Hi,
Thanks for the advice, I have not tried an ecu yet, but I hav noticed they can be had fairly cheaply

Would I need to do an immo defeat on this version of ecuif I was to swap it out? (I know on some early 2000’s vag stuff it can be done in VCDS)

Cheers

Yes, you can adapt the new donor computer to your car as long as you have the SKC numbers of the new and old ECU so you can pair the cluster back up with the new computer. Immo off is also an option, but wouldn't be achievable through VCDS.


Title: Re: A4 b5 tdi Edc15 brake light switch coding/delete
Post by: Pepe on February 16, 2018, 02:30:19 AM
Well then you dont knkw too much because youd be wrong. Immo off has nothing at all to do with vcds

Sorry my mistake was rushing when I responded to the thread, I meant to recode the ecu to the cars transponder/keys etc so that the immo still works, which can be done within VCDS, but thanks for your helpful reply....


Title: Re: A4 b5 tdi Edc15 brake light switch coding/delete
Post by: Pepe on February 16, 2018, 02:38:46 AM
Yes, you can adapt the new donor computer to your car as long as you have the SKC numbers of the new and old ECU so you can pair the cluster back up with the new computer. Immo off is also an option, but wouldn't be achievable through VCDS.

Thought as much, thanks again. I’ll get another ecu ordered, give it a shot and report back then it’s onto some mapping to better support my mods! Suppose I can always use the old ecu as a test unit