NefMoto

Technical => Tuning => Topic started by: vanrhj on February 12, 2018, 12:47:42 AM



Title: Battle to settel Lambda on MK 5 GTi
Post by: vanrhj on February 12, 2018, 12:47:42 AM
Hi All
Can anyone please assist me and check my File and log.
I am battling to settle my Lambda on my tune.
Witch maps must I have I look at to sort this out? :-[


Title: Re: Battle to settel Lambda on MK 5 GTi
Post by: nyet on February 12, 2018, 01:47:02 PM
Please post the original CSV.

Hint: if ECUxPlot can't parse it, you broke it.


Title: Re: Battle to settel Lambda on MK 5 GTi
Post by: NBR on February 12, 2018, 03:20:20 PM
Post your ori and tune if you want. Might also help if someone can look at your file and see if anything looks out of order


Title: Re: Battle to settel Lambda on MK 5 GTi
Post by: nyet on February 12, 2018, 04:15:49 PM
Post your ori and tune if you want. Might also help if someone can look at your file and see if anything looks out of order


I would much prefer a proper log.


Title: Re: Battle to settel Lambda on MK 5 GTi
Post by: vanrhj on February 12, 2018, 10:06:48 PM
Thanks to all that will assist.
Will do a proper log and post it. ;)


Title: Re: Battle to settel Lambda on MK 5 GTi
Post by: gman86 on February 13, 2018, 12:45:05 AM
From the log, there's a few cases where you're requesting load, it's going nowhere? I see a few requests of 191.7 (diagnostic limit) but the actual load isn't even >100. Also actual boost never seems to go above atmospheric. As your actual load never actually gets anywhere, you'll not be entering into any of the higher load areas of the various maps. Is the turbo working??


Title: Re: Battle to settel Lambda on MK 5 GTi
Post by: vanrhj on February 13, 2018, 02:24:36 AM
yes it is a brand new unit. I did not do I full WOT because of the file be only a base map.
I picked up that my DV valve is leaking. Will order new part and replace the faulty unit.
Will do a log and pate again.


Title: Re: Battle to settel Lambda on MK 5 GTi
Post by: vanrhj on May 20, 2022, 03:49:58 AM
Hi. Some info on issue. New DV installed and still the same issue. I then remote the compete unit and picked up that the DV does not seat properly in the housing.