|
Title: mk4 VR6 12v AFP auto to 5spd swap ecu flash question Post by: B5in on February 18, 2018, 04:18:38 PM I have a 2001 12v VR6 Jetta that was tiptronic but has been swapped to a 5spd manual trans.
my ecu is 021906018S and I am trying to flash my ecu to a manual file 021906018M...only problem is this: 021906018M = 512kb bin file size 021906018S = 1,024kb bin file size can I flash a 512kb file to a ecu with that originally has a 1,024kb file? Title: Re: mk4 VR6 12v AFP auto to 5spd swap ecu flash question Post by: _nameless on February 20, 2018, 08:31:09 PM I have a 2001 12v VR6 Jetta that was tiptronic but has been swapped to a 5spd manual trans. Did you open the ecu to see what chip the ecu has? I bet you used the wrong memory layout to read the file or clone mpps did a read twice. my ecu is 021906018S and I am trying to flash my ecu to a manual file 021906018M...only problem is this: 021906018M = 512kb bin file size 021906018S = 1,024kb bin file size can I flash a 512kb file to a ecu with that originally has a 1,024kb file? Title: Re: mk4 VR6 12v AFP auto to 5spd swap ecu flash question Post by: B5in on February 21, 2018, 07:59:39 AM Did you open the ecu to see what chip the ecu has? I bet you used the wrong memory layout to read the file or clone mpps did a read twice. I haven't popped it open yet but I used 29F800BB, is that the correct one or should I have used 400BB, it's ME7.1? Title: Re: mk4 VR6 12v AFP auto to 5spd swap ecu flash question Post by: vwaudiguy on February 21, 2018, 09:28:26 AM I haven't popped it open yet but I used 29F800BB, is that the correct one or should I have used 400BB, it's ME7.1? Split the 1mb file you read in half using a hex editor. Title: Re: mk4 VR6 12v AFP auto to 5spd swap ecu flash question Post by: _nameless on April 02, 2018, 12:41:16 AM English or ban
|