|
Title: Mk1 Leon Me7.5 Launch/NLS/ALag Post by: asenyurt on February 25, 2018, 12:44:30 PM Hi everyone
I want to add Launch/NLS/ALag to my stock Mk1 Leon 1.8t Me7.5 AUQ engine Fırst of all i read my original ecu bin file and i opened WinOls software. I saw some information from this link : http://www.nefariousmotorsports.com/wiki/index.php/Adding_anti-lag_launch_control_and_no-lift_shift and i decided to add my original bin file. added maps like Speed Threshold, Launch RPM, Ignition Cut Duration..... same adresses and i added setzi routine code to my free AA5B0 address also i changed my FTOMN to zero and i changed my setzi's routine call code. like : DA 88 B0 A5 save, checksum ok i flashed to my car then on ignition and suddenly my throttle valve trying to move like tick tack tick tack relay sound. after that i didnt upload my stock bin file than i remove battery, wait 20min. and reflashed my stock bin but my ignition off position. interesting but flashed. i think this call code wrong to my ecu. DA 88 what do you think ?? Title: Re: Mk1 Leon Me7.5 Launch/NLS/ALag Post by: nyet on February 25, 2018, 10:04:30 PM after that i didnt upload my stock bin file than i remove battery, wait 20min. and reflashed my stock bin but my ignition off position. interesting but flashed. That is the ECU doing a throttle body adaptation. It will always do that if you leave the ignition on long enough without starting the car. |