Title: me3.8.3 load specified vs corrected Post by: Adrianb on February 28, 2018, 11:00:20 AM Hello, can anyone give me a hint or explain me why I have corrected load much higher than specified / actual?
(https://s13.postimg.org/m4dyv8dwn/log.png) its 1.8T AGU with saab red top injectors, vr6 maf housing and k04-022 turbo thank you Title: Re: me3.8.3 load specified vs corrected Post by: KasperH on February 28, 2018, 12:37:52 PM I'm not strong with m3.8.3, so it might not be helpful.
but did you rescale for the larger MAF housing? Title: Re: me3.8.3 load specified vs corrected Post by: overspeed on February 28, 2018, 06:13:26 PM just after requested load map you have a IAT based factor for load...
Title: Re: me3.8.3 load specified vs corrected Post by: Adrianb on March 01, 2018, 03:38:40 AM ah, yes. It was IAT correction. Thank you ! ;)
Title: Re: me3.8.3 load specified vs corrected Post by: Cezary2528 on April 29, 2020, 12:53:07 PM Hi, I am new here and I hope this is the right place to ask my question.
I have a very similar problem with 1.8t AGU. I have AGU with saab red top injectors, standard maf The controller introduces very large load corrections. This is very apparent at low speed. Corrected load is twice as high as specified. Which sensor can cause such large corrections? The flow meter measures ok, the probe works, temperatures also look OK. In ecu is one error 00544 - Maximum Boost Pressure Exceeded 35-10 - - - Intermittent Sometimes boost is normal 1.2 bar and sometimes boost up to 2 bar Thank you in advance for your answer. (https://images91.fotosik.pl/356/96a4a468d08fadfegen.jpg) (https://images91.fotosik.pl/356/96a4a468d08fadfe.jpg) Title: Re: me3.8.3 load specified vs corrected Post by: overspeed on April 30, 2020, 07:31:48 AM look IAT factor as I said before...
Title: Re: me3.8.3 load specified vs corrected Post by: Cezary2528 on May 01, 2020, 05:32:56 AM IAT is intake air temperature?
This map ? (https://images89.fotosik.pl/357/4aeed88c7d1f0952med.jpg) (https://images89.fotosik.pl/357/4aeed88c7d1f0952.jpg) |