|
Title: Lambda component protection in 1K0907115B 391667 Post by: birchbark506 on March 14, 2018, 06:23:45 PM LAMBTS: "19.170 Lambda component protection" in 1K0907115B 391667 sw0040 i added the ori
i think the address is for KFLBTS_0_A @ 1D304A KFLBTSLBKO_2_A @ 1D310A or is the correct address @ 1D304B for KFLBTS_0_A 1D310B for KFLBTSLBKO_2_A Title: Re: Lambda component protection in 1K0907115B 391667 Post by: Kacza on March 15, 2018, 02:00:08 AM KFLBTSLBKO_1_A - 1D304A
KFLBTSLBKO_2_A - 1D310A Title: Re: Lambda component protection in 1K0907115B 391667 Post by: birchbark506 on March 15, 2018, 03:28:35 AM what address is this @ KFLBTS_0_A
Title: Re: Lambda component protection in 1K0907115B 391667 Post by: Kacza on March 15, 2018, 01:46:48 PM I guess this SW version has no duplicated maps.
There is one KFFDLBTS - 1D2F82 There is one KFDLBTS - 1D304A There is one KFLBTSLBKO - 1D310A Title: Re: Lambda component protection in 1K0907115B 391667 Post by: birchbark506 on March 15, 2018, 02:21:59 PM what size are they again 12x16?
i can add my map pack can you check it for me? i think i also have the maps in there found for over run/crackle Title: Re: Lambda component protection in 1K0907115B 391667 Post by: Kacza on March 16, 2018, 07:34:07 AM Is OK.
Title: Re: Lambda component protection in 1K0907115B 391667 Post by: birchbark506 on March 16, 2018, 11:44:44 AM is this enough for a stage 2? any wrong address in here that you notice
Title: Re: Lambda component protection in 1K0907115B 391667 Post by: Kacza on March 17, 2018, 12:21:18 AM What do you mean the second stage? For everyone it can mean something else. Title: Re: Lambda component protection in 1K0907115B 391667 Post by: birchbark506 on March 17, 2018, 05:42:37 AM Oh, I was wondering if that was enought maps to.make stage 2 power?
Title: Re: Lambda component protection in 1K0907115B 391667 Post by: nyet on March 17, 2018, 04:12:12 PM Define "stage 1" vs "stage 2"
Title: Re: Lambda component protection in 1K0907115B 391667 Post by: vwaudiguy on March 17, 2018, 09:41:08 PM Define "stage 1" vs "stage 2" Stage 1 = Stock hardware tune Stage 2 = Bolt-ons but stock turbo and injector I used to be super anal about not classifying the stages, and learned it's easier to just let it go. Title: Re: Lambda component protection in 1K0907115B 391667 Post by: birchbark506 on March 18, 2018, 04:37:00 AM Vwaudiguy thank you for that I'm still pretty new to this stuff
So yes stage 2 bolts on and is stage 2+ just a more fuel and boost is that correct? I have 3" catless downpipe fmic vis motorsport hpfp interals axle back exhaust and a cold and intake. Title: Re: Lambda component protection in 1K0907115B 391667 Post by: nubcake on March 18, 2018, 11:32:25 AM This whole "stage" stuff is largely subjective.
Here it's usually: Stage 1: all the hardware is stock, essentially just a tune. Stage 2: emissions delete, stronger tune. Stage 2+: bolt-ons (DP/IC/WMI/whatever), still stock turbo. This is sometimes just included in 2. Essentially, stage 2 == "stock turbo, but de-cat + maybe other hardware mods". Stage 3: big turbo with accompanying fueling mods, etc. Title: Re: Lambda component protection in 1K0907115B 391667 Post by: birchbark506 on March 18, 2018, 12:08:41 PM i have everything other then the WMI installed, i am looking to get a bit more power out of my current file,
Title: Re: Lambda component protection in 1K0907115B 391667 Post by: vwaudiguy on March 18, 2018, 11:05:32 PM i have everything other then the WMI installed, i am looking to get a bit more power out of my current file, Upgraded the HPFP? Title: Re: Lambda component protection in 1K0907115B 391667 Post by: birchbark506 on March 19, 2018, 02:29:14 PM i put the stage 1 Vis motor sports HPFP on there the other day.
|