|
Title: Old Ecu Post by: mourison on April 14, 2018, 07:00:46 AM Hi everyone :)), is possible to do ignition cut rev limiter on old Ecu ? something like Bosh 2,8 .. or I have to change ECU to newer ? , thanks :))
Title: Re: Old Ecu Post by: IamwhoIam on April 14, 2018, 07:06:20 AM what type is it exactly? From what car, what engine etc?
Title: Re: Old Ecu Post by: mourison on April 14, 2018, 12:13:35 PM Bravo HGT 1997 ECU 2.10
Title: Re: Old Ecu Post by: _nameless on April 14, 2018, 07:15:14 PM find the ignition dwell table and set the last row to zero for dwell time. change the axis value to 5-10rpm above the second to last rows value. this will give you a "hard cut" if you change ign timing in that rpm range in the last rows -20* that will add in the bing bang boomers
Title: Re: Old Ecu Post by: mourison on April 15, 2018, 02:57:36 AM Really thank u :))
I looked for some definiton file, but i couldn´t find any def files ... :/ . Everything is for newer versions :/ Can u give me some tips where can i find it ? . Thank u again :)) Title: Re: Old Ecu Post by: _nameless on April 15, 2018, 05:14:28 AM Really thank u :)) the only fiat 2.1 damos i have are for a punto. if youre good at comparing you should be able to find it I looked for some definiton file, but i couldn´t find any def files ... :/ . Everything is for newer versions :/ Can u give me some tips where can i find it ? . Thank u again :)) Title: Re: Old Ecu Post by: mourison on April 16, 2018, 09:24:21 AM It works good :)) , thank u very much.
|