|
Title: Double ME7 - 6.0 W12 Post by: Xynactra on April 30, 2018, 12:17:10 AM Hi Guys.
First i have to say, normaly i speak german so my englisch is not that good as i want it. Second, my question: I have an Audi A8 D3 2004 MY with a 6.0 W12 Engine (Code: BHT) that Features 2 Pieces of ME7 Controls, one for each Cylinder row. This Engine has also a electrical Controlled Thermostat which is, so i heard, set to 105 Degrees Celius. Thats a lot for an Engine that produces so much heat like the W12.. If its possible i would like to set the opening point of the Thermostat to 85 Degrees Celius. What do i need? Do i need to reprogramm both Control Modules? Are there anything special beside that on the W12 what it makes more difficult to flash it? I have 2 Dumb Modules and 1 from ross Tech. Thank you a lot! Title: Re: Double ME7 - 6.0 W12 Post by: nubcake on May 12, 2018, 03:28:50 AM Both ECUs should contain absolutely the same bin.
I guess you can bootmode flash them without any issues. Not sure about OBD with common tools. Thermostat control is in the %KMTR module - you need to either get a map pack for your bin or disassemble the code to find all related maps. The function logic itself is described nicely in MED9 FR. I guess it should be enough to lower tmotsoll by altering (KFKTRLN & KLTMOTTUM) or KFKTRV. Title: Re: Double ME7 - 6.0 W12 Post by: Xynactra on May 17, 2018, 05:46:47 AM Thank you for your answer =)
Hmm, if i try it over OBD, is it possible to brick something? Or is Reading the ECU just like copy a File on my desktop? =) Title: Re: Double ME7 - 6.0 W12 Post by: prj on May 17, 2018, 06:16:09 AM Of course it is possible to brick something, also make sure you have proper tools for this.
Nefmoto obviously won't work. |