NefMoto

Hello guys :)
A4 1.8T 110kw , 2000 - Bosh 7.5
Processor: Siemens C167CR 
ECU prod. - 4B0906018AA

How can i turn on LC please ? , this ecu is bosh 7.5, Can i do it like on O1 RS 132kw ? same ecu bosh 7.5, but audi has smaller bin :/ .. process is same ?
.... but i dont have damos for audi. Can someone send me please ? or Can someone turn on LC please ?, Soft i post below :) .. Thanks and i am sorry for my english :)

here try this

Where ? :O

Cheers Marty!  +1

I am Now looking for kftsrl And ftomn :/

Hope this helps.

Christian

read this:
http://nefariousmotorsports.com/forum/index.php?topic=7004.0

What to do with kftsrl ? :/

You're the one that wanted it?

It has nothing to do with LC.

I Did all in s4wiki , but IT didnt Bang :/

IT stopped in 4500rpm but didnt Bang :/

What did you do?  

*That's soft launch.

Can u turn IT on please ? :/

No, because you've just listed THREE separate things.  LC, hard cut and soft cut.

I Did
Nmax nmaxog 4500 6000, dnmaxh 20, ftomn0 kftsrl x Axis 0-6000

So soft launch at 4500 and hardcut all the time?  Your kftsrl is likely wrong.

What Is Wrong :(

I cant put -75 to kftsrl

okey , hardcut if i put-100 to spark ignition map it didnt shoot , why ?

Picture of what you are doing please.

youre modifying values for soft cut, mixing up hardcut rev limiter settings and youll never get it to shoot flames without code patching hard cut launch control. news flash no one is going to patch your file for you for free so best off start over and read the threads on this forum stickied to the tops of the sub topic and learn to do it yourself

Okey, i posted pictures of things i did, then please what i am doing wrong :) ? :/

Your idea of hardcut is totally wrong.

Your entire table is defined wrong.  Axis, values.

0-7000 makes no sense.

ah , em, Can u explain me please how to do it ? ...
KFTSRL , is it a ignition dwell time map ? .. tnen axis to 0-7000 and colum to  0 right ? but i will need second map right ? KFSZT

No, you shift axis down one set.  Last column is all 0, previous column is last columns old values.  Interpolation.

And vertical Axis stay Stock ? And i neee ONLY this map ?

No, vertical goes to 0 on the edited column.

So last column goes to your limiter value.  Column one to the left of the last column goes to one value DOWN from the limiter.  Entire last column goes to 0.  For 0 dwell at the limiter.

Don't just bash numbers in - understand what you're trying to achieve.

I did this, but it didnt work :/

What ASM modifications are you planning on making?

On this car is HardCut just for fun :)
I have o1 RS with 230hp LC and NLS, IC bigger , on this car i have 7th turbo k04 xD , brakes susp..   I like everything about cars and love learning those things about ecu tuning :)

Your table is still defined wrong and your axis jump is way too high.

Can u say me please , how to define table good ? :)

Use a defined file and transfer it across.  It takes practice.

This is KFTSRL in my O1 soft 032BJ ... There is no zeros ... I cant transfer it bcs i have not soft with hardcut limiter :D :/

That table is not defined properly.  What is that table representing?

Ignition time i think ..

1A405 is KFTSRL on 032BJ

Yes, i looked to my soft from o1 RS, how it looks :)

Load, RPM, m/s.

and 1A135 9x10 is good adress ?

I cant see file, what u attached :/

Yes, is good.
On the left/down side is your bin.(in the 1st/2nd print screen)
Is from comparing your 018AA to mine 018DC, even though they are quite different.

could someone tell me if the ones i did find are the correct address and the once i can't find could someone please let me know the address also added kp file with what i have done so far

CWNMAXMD - 15AD0
TMOTNMX 100F8
TNMXH 17401
CWDNMAX ?
VNMX 15ACE
DNMAXH 1B1E4
ITNMXH 17401
NMAX ?
NMAXOG ?

NMAX - 12B7A
NMAXOG -12B82
This is in my AA soft. :) maybe it helps :)

Now, Am i defined my table to good values ? :)

had no luck with them address thank you tho

NMAX: 1361A
NMAXOG: 13622

Christian

they worked are the rest of my maps i posted correct?
also what is the address for this map CWDNMAX
and are they enough to get LC to work? or dose it have to have hard cut aswell?
TNMXH maybe 17407
ITNMXH 17401 is this correct

Thank you

Have a read over the wiki.  Softlaunch is possible however a hard ignition cut LC would require custom script.

CWDNMAX : 14EDE
TNMXH: 12B8A
ITNMXH: 12B78

Christian

You are confusing terms.

Hard cut LC, hard cut and soft launch are all different.

I d like to do hardcut ... Bang a flames in rev limiter..
I need JUST ftom a kftsrl , right ?

Yes :)

How would you do that is it a file to import or is it a map?

There must be a bug on Nefmoto, this thread keeps coming up as unread but there is never new content ???

LC/NLS attracts a certain demographic ... what do you expect?

Same with the overrun detonation crowd.

Solved :D , thank u all