|
Title: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU Post by: vanrhj on May 18, 2018, 02:27:31 AM Hi All
In need of any info that can assist me. I flashed my mk5 gti 2.0 fsi with a stage 2 file via OBD port. The flash did not complete because there was an communication error during the flash. I tried to flash the file again but without any success. Now I do not have any communication to the ECU. Can anyone assist me please? Title: Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU Post by: birchbark506 on May 18, 2018, 02:44:56 AM You will most likely need to recover via bdm reader. Did you cross flash or was it your ori file tuned to stage2
Title: Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU Post by: vanrhj on May 18, 2018, 02:48:06 AM It was my original file.
I had a base file from eurodyne that I have also tried but no luck. Title: Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU Post by: vanrhj on May 18, 2018, 03:22:50 AM Can it be a CANBUS issue?
|