|
Title: 18057 - Missing message from ABS Post by: carsey on May 19, 2018, 11:31:21 AM Hi all
I have got rid of the ABS module on my track car running a 018H ECU flash. However, the car keeps throwing a fault code for 18057 - Missing message from ABS Controller. I have removed the soft coding for the ABS in the CAN Gateway in the cluster, which is now soft coded to 0000 which took care of the light on the dash. I tried to sort the ECU out but keep getting the error back up. Ive tried to 0 the following maps. CW_CAN_R0,1,2,3 CW_CAN_S0,1,2,3 CW_CAN_C CWCS CWGC is still left as stock currently. Ive done a search on here and the above values were mentioned a few times, so I thought id start with them, but still the fault returns. Has anyone a idea what to tweak to stop it coming up? Thanks Chris Title: Re: 18057 - Missing message from ABS Post by: _nameless on May 19, 2018, 04:10:58 PM Just error class it. Cla
Title: Re: 18057 - Missing message from ABS Post by: carsey on May 20, 2018, 01:11:13 AM What map does that?
Title: Re: 18057 - Missing message from ABS Post by: vwaudiguy on May 20, 2018, 08:20:43 AM What map does that? He means delete the fault code/class. Each fault code has 1/2 corresponding locations to 00 if you don't want them reported. Title: Re: 18057 - Missing message from ABS Post by: carsey on May 20, 2018, 09:20:03 AM Do you know what map it is or the location?
Title: Re: 18057 - Missing message from ABS Post by: vwaudiguy on May 20, 2018, 08:14:27 PM Do you know what map it is or the location? If you post your binary, I can take a look... Title: Re: 18057 - Missing message from ABS Post by: carsey on May 26, 2018, 01:53:32 PM Commercial tune so cant post it up. Its a 018H 0004 software
|