|
Title: my fuel not follow KFLBTS Post by: tao13 on June 03, 2018, 01:33:03 AM Hi all.
I use an BAM file with EGT disabled. I set my TABGBTS to 400 degree. This is my LAMFA stock from BAM file and this is my KFLBTS modfied by me. I have a log too and i saw my fuel follow LAMFA between 4200 rpm even if i have EGT (calculate) bigger than 400 degree. Any sugestion please! Title: Re: my fuel not follow KFLBTS Post by: tao13 on June 03, 2018, 08:23:43 AM After i changed tabgbts to 820 degree my fuel follow kflbts.....
The rule is not respected i think because i knew if egt > tabgbts ecu works after kflbts if egt <= tabgbts works after lamfa Correct or i'm wrong? Title: Re: my fuel not follow KFLBTS Post by: nyet on June 03, 2018, 10:37:04 AM In general the lowest lambda wins.
In order for BTS to be active (below lambda 1), and thus take over from lamfa, certain conditions have to be met. What do you mean by "EGT disabled"? Also, did you modfy the other BTS maps? Title: Re: my fuel not follow KFLBTS Post by: tao13 on June 03, 2018, 11:18:18 AM Thanks again NYET for your answer.
I have a k04-023 on my auq engine and i don't have egt on my ecu but i wrote a file from BAM (with egt), and i disabled egt from soft like this CDATR (0x18196) = 0 CDATS (0x18197) = 0 CATR (0x192CA) = 0 So i think my car works now after egt model calculated. I modified only LAMFA , KFLBTS and TABGBTS Title: Re: my fuel not follow KFLBTS Post by: nyet on June 03, 2018, 11:24:34 AM Did you consult the rest of the BTS section of the s4wiki?
Title: Re: my fuel not follow KFLBTS Post by: tao13 on June 03, 2018, 11:37:23 AM I wrote about bts between knock and other maps but I MUST READ more than 20 times to understand ok
If i read only one or two times all things are ambigous. Title: Re: my fuel not follow KFLBTS Post by: KasperH on June 03, 2018, 02:46:08 PM Have you configured CWLAMBTS correctly?
Title: Re: my fuel not follow KFLBTS Post by: tao13 on June 03, 2018, 09:20:16 PM CWLAMBTS is 0
Title: Re: my fuel not follow KFLBTS Post by: prj on June 04, 2018, 01:42:50 AM I know exactly how to fix it, but I see zero contribution to forum...
Besides, if you look at the BTS module, there's not that many variables. It is simple to compare to a car that has BTS enabled to find what you need to change. Title: Re: my fuel not follow KFLBTS Post by: nyet on June 04, 2018, 08:53:14 AM I know exactly how to fix it, but I see zero contribution to forum... I'm not sure thats really fair, he's clearly a noob :/ It isn't as if he's in a position to contribute anything yet anyway. |